8 open source boards using the AD8226

Real designs built with the AD8226, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the AD8226

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the AD8226 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 2 has a series resistor on 5 of 6 designs, most often 330 Ω (then 5.49 kΩ).
  • Pin 3 has a series resistor on 5 of 6 designs, most often 330 Ω (then 5.49 kΩ).
  • Pin 8 has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
  • Pin 5 is tied to GND on 5 of 6 designs.
Pin 1Connected to: Signal 100%
  • Series resistor on 67% · 0 Ω (1), 1 kΩ (1), 47 kΩ (1)
  • Capacitor to GND on 33% · 10 nF (1), 1 nF (1)
  • Series capacitor on 33% · 15 nF (1), 10 nF (1)
Pin 2Connected to: Signal 83% · not connected 17%
  • Series resistor on 83% · 330 Ω (1), 5.49 kΩ (1), 2.2 kΩ (1)
Pin 3Connected to: Signal 83% · not connected 17%
  • Series resistor on 83% · 330 Ω (1), 5.49 kΩ (1), 2.2 kΩ (1)
Pin 4Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 10 kΩ (1), 47 kΩ (1)
  • Series capacitor on 33% · 15 nF (1), 10 nF (1)
Pin 5Connected to: GND 83% · a signal 17%
Pin 7Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 1.69 kΩ (1), 100 Ω (1)
Pin 8Connected to: 3.3V 67% · a signal 33%
  • Decoupling capacitor on 83% · 100 nF (8), 10 µF (4), 2.2 µF (2)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include R1 panel by cuspaceflight, M2fc by cuspaceflight, Bikedar by adamgreig and Gem hardware by ajakef.

The AD8226 in open source designs

The gallery holds 8 open source boards using the AD8226 from 6 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 95 components.

57% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is R1 panel by cuspaceflight.

Microcontrollers on boards using the AD8226

What boards using the AD8226 are built for

AD8226: common questions

Where can I find a AD8226 reference design?

Each of the 8 boards on this page is a real design using the AD8226. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the AD8226 pin 2?

Pin 2 has a series resistor on 5 of 6 designs, most often 330 Ω (then 5.49 kΩ). Counted from the KiCad layouts of 6 open source designs using the AD8226.

What resistor goes on the AD8226 pin 3?

Pin 3 has a series resistor on 5 of 6 designs, most often 330 Ω (then 5.49 kΩ). Counted from the KiCad layouts of 6 open source designs using the AD8226.

What decoupling capacitors do designs use on the AD8226 pin 8?

Pin 8 has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the AD8226.

What parts are used alongside the AD8226?

The AD8541, AD8656, ADP3335, ADXL345 and MS5611-01BA03 appear in the most repositories here.

Which microcontrollers do boards using the AD8226 use?

Most are built on STM32 (3).

How big is a typical board using the AD8226?

The median is 50 × 50 mm, and 57% are two-layer designs.

What is the most popular open source board using the AD8226?

By GitHub stars, R1 panel by cuspaceflight, with 93 stars.

Can I simulate one of these boards using the AD8226 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part