4 open source boards using the ADM2587EBRWZ-REEL7
Real designs built with the ADM2587EBRWZ-REEL7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Industrial IoT Controller
Hossam-Mamdouh
102 × 173.9 mm189 parts2LMIT0ESP32
Iron node
enkhbold470
90 × 66 mm79 parts4LCERN-OHL-S-2.00ESP32
Nx-PCBA
jgrano
110 × 85 mm78 parts2LNo license0ESP32
Iron node
enkhbold470
90 × 66 mm79 parts4LCERN-OHL-S-2.00
The ADM2587EBRWZ-REEL7 in open source designs
The gallery holds 4 open source boards using the ADM2587EBRWZ-REEL7 from 4 GitHub repositories; a typical one measures about 96 × 75.5 mm and carries around 79 components.
50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Industrial IoT Controller by Hossam-Mamdouh.
Parts used alongside the ADM2587EBRWZ-REEL7
Microcontrollers on boards using the ADM2587EBRWZ-REEL7
What boards using the ADM2587EBRWZ-REEL7 are built for
ADM2587EBRWZ-REEL7: common questions
Where can I find a ADM2587EBRWZ-REEL7 reference design?
Each of the 4 boards on this page is a real design using the ADM2587EBRWZ-REEL7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ADM2587EBRWZ-REEL7?
The ESP32-S3-WROOM-1-N8R8, LMR36510ADDAR, SN65HVD230DR, USBLC6-2SC6 and W5500 appear in the most repositories here.
Which microcontrollers do boards using the ADM2587EBRWZ-REEL7 use?
Most are built on ESP32 (4).
How big is a typical board using the ADM2587EBRWZ-REEL7?
The median is 96 × 75.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the ADM2587EBRWZ-REEL7?
By GitHub stars, Industrial IoT Controller by Hossam-Mamdouh, with 0 stars.
Can I simulate one of these boards using the ADM2587EBRWZ-REEL7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.