3 open source boards using the ADP122AUJZ-3.3-R7
Real designs built with the ADP122AUJZ-3.3-R7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Leyden Jar controller
mymakercorner
85 × 26.5 mm82 parts4LGPL-3.017
RP2040/RP2350Phoenix Project No 1 - Type H
304 × 112 mm201 parts2LCC-BY-SA-4.03
RP2040/RP2350Phoenix Project No 1 - Type S
304 × 112 mm139 parts2LCC-BY-SA-4.03
The ADP122AUJZ-3.3-R7 in open source designs
The gallery holds 3 open source boards using the ADP122AUJZ-3.3-R7 from 2 GitHub repositories; a typical one measures about 304 × 111.9 mm and carries around 139 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Leyden Jar controller PCB by mymakercorner.
Parts used alongside the ADP122AUJZ-3.3-R7
Microcontrollers on boards using the ADP122AUJZ-3.3-R7
What boards using the ADP122AUJZ-3.3-R7 are built for
ADP122AUJZ-3.3-R7: common questions
Where can I find a ADP122AUJZ-3.3-R7 reference design?
Each of the 3 boards on this page is a real design using the ADP122AUJZ-3.3-R7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ADP122AUJZ-3.3-R7 use?
Most are built on RP2040/RP2350 (3).
How big is a typical board using the ADP122AUJZ-3.3-R7?
The median is 304 × 111.9 mm, and 67% are two-layer designs.
What is the most popular open source board using the ADP122AUJZ-3.3-R7?
By GitHub stars, Leyden Jar controller PCB by mymakercorner, with 17 stars.
Can I simulate one of these boards using the ADP122AUJZ-3.3-R7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.