8 open source boards using the ADS1299IPAG
Real designs built with the ADS1299IPAG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
VolksEEG
VolksEEG
121.2 × 165.5 mm143 parts4LGPL-3.075AVR/Arduino
OpenHardwareExG Shield
OpenElectronicsLab
125.1 × 59.7 mm195 parts4LCERN-OHL-1.28Neuronics eeg
kamenzh
88 × 80 mm91 parts4LMIT2EEG-I-LAB
Tahacrpc
101.6 × 53.3 mm139 parts4LCERN-OHL-1.21ESP32
ADS1299-BioAmp
wangq22
74.5 × 49 mm76 parts2LNo license1Nordic nRF
EEG32
Iwetter
68.3 × 55.7 mm215 parts4LNo license0Convey
kennito2035
64 × 64 mm141 parts4LCERN-OHL-S-2.00- schematic only · 3 parts
Project phoenix dashboard
karthickraja2371-rgb
3 partsMIT0
How designs wire the ADS1299IPAG
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ADS1299IPAG connects to, and the resistors, capacitors and other passives placed on it.
- The BIASINV_61 pin has a series capacitor on 7 of 7 designs, most often 1.5 nF (then 1 nF).
- The BIASINV_61 pin has a series resistor on 7 of 7 designs, most often 1 MΩ (then 3.98 kΩ).
- The BIASOUT_63 pin has a series resistor on 7 of 7 designs, most often 1 MΩ (then 4.99 kΩ).
- The BIASOUT_63 pin has a series capacitor on 7 of 7 designs, most often 1.5 nF (then 1 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN8N_1pin 1 | Connected to: Signal 57% · 2.5V 29% |
|
| IN8P_2pin 2 | Connected to: Signal 100% |
|
| IN7N_3pin 3 | Connected to: Signal 57% · 2.5V 29% |
|
| IN7P_4pin 4 | Connected to: Signal 100% |
|
| IN6N_5pin 5 | Connected to: Signal 57% · 2.5V 29% |
|
| IN6P_6pin 6 | Connected to: Signal 100% |
|
| IN5N_7pin 7 | Connected to: Signal 57% · 2.5V 29% |
|
| IN5P_8pin 8 | Connected to: Signal 100% |
|
| IN4N_9pin 9 | Connected to: Signal 57% · 2.5V 29% |
|
| IN4P_10pin 10 | Connected to: Signal 100% |
|
| IN3N_11pin 11 | Connected to: Signal 57% · 2.5V 29% |
|
| IN3P_12pin 12 | Connected to: Signal 100% |
|
| IN2N_13pin 13 | Connected to: Signal 57% · 2.5V 29% |
|
| IN2P_14pin 14 | Connected to: Signal 100% |
|
| IN1N_15pin 15 | Connected to: Signal 57% · 2.5V 29% |
|
| IN1P_16pin 16 | Connected to: Signal 100% |
|
| SRB1_17pin 17 | Connected to: Signal 71% · not connected 29% |
|
| AVDD_19pin 19 | Connected to: 5V 100% | — |
| AVSS_20pin 20 | Connected to: GND 43% · a signal 43% |
|
| AVDD_21pin 21 | Connected to: 5V 100% | — |
| AVDD_22pin 22 | Connected to: 5V 100% | — |
| AVSS_23pin 23 | Connected to: GND 43% · a signal 43% |
|
| VREFP_24pin 24 | Connected to: VREFP 57% · a signal 43% |
|
| VREFN_25pin 25 | Connected to: GND 43% · a signal 43% |
|
| VCAP4_26pin 26 | Connected to: Signal 100% |
|
| NC_27pin 27 | Connected to: Not connected 100% | — |
| VCAP1_28pin 28 | Connected to: Signal 100% |
|
| NC_29pin 29 | Connected to: Not connected 100% | — |
| VCAP2_30pin 30 | Connected to: Signal 100% |
|
| RESV1_31pin 31 | Connected to: GND 86% | — |
| AVSS_32pin 32 | Connected to: GND 43% · a signal 43% |
|
| DGND_33pin 33 | Connected to: GND 100% | — |
| START_38pin 38 | Connected to: The microcontroller 29% |
|
| DAISY_IN_41pin 41 | Connected to: GND 71% | — |
| GPIO1_42pin 42 | Connected to: A connector 29% |
|
| GPIO2_44pin 44 | Connected to: A connector 29% |
|
| GPIO3_45pin 45 | Connected to: A connector 29% |
|
| GPIO4_46pin 46 | Connected to: A connector 29% |
|
| DVDD_48pin 48 | Connected to: 3.3V 86% |
|
| DGND_49pin 49 | Connected to: GND 100% | — |
24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include VolksEEG by VolksEEG, OpenHardwareExG Shield by OpenElectronicsLab, Neuronics eeg by kamenzh and EEG-I-LAB by Tahacrpc.
The ADS1299IPAG in open source designs
The gallery holds 8 open source boards using the ADS1299IPAG from 8 GitHub repositories; a typical one measures about 88 × 59.7 mm and carries around 140 components.
86% use four copper layers or more, and 75% carry an open source license.
The most starred is VolksEEG by VolksEEG.
Microcontrollers on boards using the ADS1299IPAG
What boards using the ADS1299IPAG are built for
ADS1299IPAG: common questions
Where can I find a ADS1299IPAG reference design?
Each of the 8 boards on this page is a real design using the ADS1299IPAG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ADS1299IPAG BIASINV_61 pin connected?
The BIASINV_61 pin has a series capacitor on 7 of 7 designs, most often 1.5 nF (then 1 nF). Counted from the KiCad layouts of 7 open source designs using the ADS1299IPAG.
What resistor goes on the ADS1299IPAG BIASOUT_63 pin?
The BIASOUT_63 pin has a series resistor on 7 of 7 designs, most often 1 MΩ (then 4.99 kΩ). Counted from the KiCad layouts of 7 open source designs using the ADS1299IPAG.
What resistor goes on the ADS1299IPAG IN8P_2 pin?
The IN8P_2 pin has a series resistor on 6 of 7 designs, most often 4.99 kΩ (then 2.61 kΩ). Counted from the KiCad layouts of 7 open source designs using the ADS1299IPAG.
Which microcontrollers do boards using the ADS1299IPAG use?
Most are built on Nordic nRF (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the ADS1299IPAG?
The median is 88 × 59.7 mm, and 14% are two-layer designs.
What is the most popular open source board using the ADS1299IPAG?
By GitHub stars, VolksEEG by VolksEEG, with 75 stars.
Can I simulate one of these boards using the ADS1299IPAG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.