3 open source boards using the ADS131A04

Real designs built with the ADS131A04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ADS131A04 in open source designs

The gallery holds 3 open source boards using the ADS131A04 from 2 GitHub repositories; a typical one measures about 75 × 60 mm and carries around 139 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Pressure by npgo22.

Microcontrollers on boards using the ADS131A04

What boards using the ADS131A04 are built for

ADS131A04: common questions

Where can I find a ADS131A04 reference design?

Each of the 3 boards on this page is a real design using the ADS131A04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ADS131A04?

The AP2112K-3.3, LAN8742A, STM32H563RIVx, TJA1042T-3 and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the ADS131A04 use?

Most are built on STM32 (3).

How big is a typical board using the ADS131A04?

The median is 75 × 60 mm, and 0% are two-layer designs.

What is the most popular open source board using the ADS131A04?

By GitHub stars, Pressure by npgo22, with 0 stars.

Can I simulate one of these boards using the ADS131A04 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part