6 open source boards using the ADUM1201ARZ-RL7
Real designs built with the ADUM1201ARZ-RL7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
ModularLabPSU
tom-biskupic
128 × 80 mm140 parts2LNo license33Opsum
nitefood
80 × 50 mm41 parts2LMIT5STM32
Robotont electronics mainboard
robotont
304.3 × 274 mm407 parts2LNo license1ESP32
MecProInverter
Eg0st
104 × 168 mm172 parts4LNo license0ESP32
Esp32industrial
Karma7272-cmd
20 × 234 mm28 parts2LNo license0Io
zapta
90 × 88.4 mm47 parts2LNo license1
How designs wire the ADUM1201ARZ-RL7
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ADUM1201ARZ-RL7 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD1 pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 1 µF).
- The VDD2 pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD1pin 1 | Connected to: 5V 83% · a signal 17% |
|
| GND1pin 4 | Connected to: GND 67% · a signal 33% |
|
| GND2pin 5 | Connected to: GND 67% · a signal 33% |
|
| VDD2pin 8 | Connected to: 3.3V 50% · GND 17% · a signal 33% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ModularLabPSU by tom-biskupic, Opsum by nitefood, Robotont electronics mainboard by robotont and Io by zapta.
The ADUM1201ARZ-RL7 in open source designs
The gallery holds 6 open source boards using the ADUM1201ARZ-RL7 from 6 GitHub repositories; a typical one measures about 97 × 128.2 mm and carries around 94 components.
83% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is ModularLabPSU by tom-biskupic.
Microcontrollers on boards using the ADUM1201ARZ-RL7
What boards using the ADUM1201ARZ-RL7 are built for
ADUM1201ARZ-RL7: common questions
Where can I find a ADUM1201ARZ-RL7 reference design?
Each of the 6 boards on this page is a real design using the ADUM1201ARZ-RL7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ADUM1201ARZ-RL7 VDD1 pin?
The VDD1 pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the ADUM1201ARZ-RL7.
What decoupling capacitors do designs use on the ADUM1201ARZ-RL7 VDD2 pin?
The VDD2 pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the ADUM1201ARZ-RL7.
Which microcontrollers do boards using the ADUM1201ARZ-RL7 use?
Most are built on ESP32 (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the ADUM1201ARZ-RL7?
The median is 97 × 128.2 mm, and 83% are two-layer designs.
What is the most popular open source board using the ADUM1201ARZ-RL7?
By GitHub stars, ModularLabPSU by tom-biskupic, with 33 stars.
Can I simulate one of these boards using the ADUM1201ARZ-RL7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.