5 open source boards using the ADUM1402BRWZ

Real designs built with the ADUM1402BRWZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The ADUM1402BRWZ in open source designs

The gallery holds 5 open source boards using the ADUM1402BRWZ from 4 GitHub repositories; a typical one measures about 70 × 70 mm and carries around 202 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is FreeEEG32-beta shorting minuses by neuroidss.

Microcontrollers on boards using the ADUM1402BRWZ

What boards using the ADUM1402BRWZ are built for

ADUM1402BRWZ: common questions

Where can I find a ADUM1402BRWZ reference design?

Each of the 5 boards on this page is a real design using the ADUM1402BRWZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ADUM1402BRWZ?

The 473521001, ADR4525, LSM6DS3, 8.192MHz and AD7770 appear in the most repositories here.

Which microcontrollers do boards using the ADUM1402BRWZ use?

Most are built on STM32 (3), ESP32 (1) and ESP8266 (1).

How big is a typical board using the ADUM1402BRWZ?

The median is 70 × 70 mm, and 0% are two-layer designs.

What is the most popular open source board using the ADUM1402BRWZ?

By GitHub stars, FreeEEG32-beta shorting minuses by neuroidss, with 166 stars.

Can I simulate one of these boards using the ADUM1402BRWZ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part