2 open source boards using the ISO7341c_spi

Real designs built with the ISO7341c_spi, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ISO7341c_spi in open source designs

The gallery holds 2 open source boards using the ISO7341c_spi from 2 GitHub repositories; a typical one measures about 67.9 × 73 mm and carries around 208 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is FreeEEG32 by neuroidss.

Microcontrollers on boards using the ISO7341c_spi

What boards using the ISO7341c_spi are built for

ISO7341c_spi: common questions

Where can I find a ISO7341c_spi reference design?

Each of the 2 boards on this page is a real design using the ISO7341c_spi. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ISO7341c_spi?

The 473521001, 8.192MHz, AD7770, ADP7118AUJZ-3.3 and ADR4525 appear in the most repositories here.

Which microcontrollers do boards using the ISO7341c_spi use?

Most are built on ESP32 (1) and ESP8266 (1).

How big is a typical board using the ISO7341c_spi?

The median is 67.9 × 73 mm, and 0% are two-layer designs.

What is the most popular open source board using the ISO7341c_spi?

By GitHub stars, FreeEEG32 by neuroidss, with 39 stars.

Can I simulate one of these boards using the ISO7341c_spi before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part