3 open source boards using the AHT20-F
Real designs built with the AHT20-F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Rp2350-macropad
arkandas
71.4 × 99.7 mm80 parts2LMIT0ESP32
ESP BMCU
mengxyz
31.2 × 99.6 mm74 parts2LGPL-3.00Blast-Shield
JAS-UCF
90 × 75.9 mm69 parts2LNo license0
The AHT20-F in open source designs
The gallery holds 3 open source boards using the AHT20-F from 3 GitHub repositories; a typical one measures about 71.4 × 99.6 mm and carries around 74 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Rp2350-macropad by arkandas.
Microcontrollers on boards using the AHT20-F
What boards using the AHT20-F are built for
AHT20-F: common questions
Where can I find a AHT20-F reference design?
Each of the 3 boards on this page is a real design using the AHT20-F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AHT20-F use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the AHT20-F?
The median is 71.4 × 99.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the AHT20-F?
By GitHub stars, Rp2350-macropad by arkandas, with 0 stars.
Can I simulate one of these boards using the AHT20-F before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.