2 open source boards using the AM1S-2403S

Real designs built with the AM1S-2403S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The AM1S-2403S in open source designs

The gallery holds 2 open source boards using the AM1S-2403S from 2 GitHub repositories; a typical one measures about 56.4 × 27.4 mm and carries around 33 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is HM-LC-Bl1-FM-DC by stan23.

Parts used alongside the AM1S-2403S

Microcontrollers on boards using the AM1S-2403S

What boards using the AM1S-2403S are built for

AM1S-2403S: common questions

Where can I find a AM1S-2403S reference design?

Each of the 2 boards on this page is a real design using the AM1S-2403S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AM1S-2403S use?

Most are built on AVR/Arduino (2).

How big is a typical board using the AM1S-2403S?

The median is 56.4 × 27.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the AM1S-2403S?

By GitHub stars, HM-LC-Bl1-FM-DC by stan23, with 21 stars.

Can I simulate one of these boards using the AM1S-2403S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part