3 open source boards using the AMC1100DUB

Real designs built with the AMC1100DUB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filtersOpen license only|Most starred Recently updated Most components

The AMC1100DUB in open source designs

The gallery holds 3 open source boards using the AMC1100DUB from 3 GitHub repositories; a typical one measures about 100 × 160 mm and carries around 325 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is TWIST V1.4 by owntech-foundation.

Parts used alongside the AMC1100DUB

What boards using the AMC1100DUB are built for

Sensors 1

AMC1100DUB: common questions

Where can I find a AMC1100DUB reference design?

Each of the 3 boards on this page is a real design using the AMC1100DUB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AMC1100DUB?

The AZ1117CH-5.0TRG1, FODM217A, MAX33046EASA+T, MCP6486UT-E/LT and MCP6487T-E/SN appear in the most repositories here.

How big is a typical board using the AMC1100DUB?

The median is 100 × 160 mm, and 0% are two-layer designs.

What is the most popular open source board using the AMC1100DUB?

By GitHub stars, TWIST V1.4 by owntech-foundation, with 19 stars.

Can I simulate one of these boards using the AMC1100DUB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.