4 open source boards using the AOZ1280CI

Real designs built with the AOZ1280CI, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The AOZ1280CI in open source designs

The gallery holds 4 open source boards using the AOZ1280CI from 4 GitHub repositories; a typical one measures about 89.5 × 60.5 mm and carries around 90 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Blackpants by o7-machinehum.

Microcontrollers on boards using the AOZ1280CI

AOZ1280CI: common questions

Where can I find a AOZ1280CI reference design?

Each of the 4 boards on this page is a real design using the AOZ1280CI. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AOZ1280CI use?

Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the AOZ1280CI?

The median is 89.5 × 60.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the AOZ1280CI?

By GitHub stars, Blackpants by o7-machinehum, with 189 stars.

Can I simulate one of these boards using the AOZ1280CI before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part