3 open source boards using the AQY212GSZ
Real designs built with the AQY212GSZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SlideScanner
filmolino
50 × 50 mm37 parts2LGPL-3.028ESP32
DIYBMS ESP32 Controller
chipsi
122.5 × 87.6 mm77 parts2LCC-BY-NC-4.00ESP32
DIYBMS ESP32 Controller
Arkariusz
122.5 × 87.6 mm75 parts2LCC-BY-NC-4.00
The AQY212GSZ in open source designs
The gallery holds 3 open source boards using the AQY212GSZ from 3 GitHub repositories; a typical one measures about 122.5 × 87.6 mm and carries around 75 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is SlideScanner by filmolino.
Parts used alongside the AQY212GSZ
Microcontrollers on boards using the AQY212GSZ
What boards using the AQY212GSZ are built for
AQY212GSZ: common questions
Where can I find a AQY212GSZ reference design?
Each of the 3 boards on this page is a real design using the AQY212GSZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AQY212GSZ?
The AMS1117-3.3, EL3H7(B)(TA)-G, ESP32-DEVKITC-32D and SN65HVD75DR appear in the most repositories here.
Which microcontrollers do boards using the AQY212GSZ use?
Most are built on ESP32 (2).
How big is a typical board using the AQY212GSZ?
The median is 122.5 × 87.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the AQY212GSZ?
By GitHub stars, SlideScanner by filmolino, with 28 stars.
Can I simulate one of these boards using the AQY212GSZ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.