21 open source boards using the SN65HVD75DR

Real designs built with the SN65HVD75DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the SN65HVD75DR

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the SN65HVD75DR connects to, and the resistors, capacitors and other passives placed on it.

  • The A pin has a series resistor on 12 of 13 designs, most often 120 Ω (then 62 Ω).
  • The VCC pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 1 µF).
  • The B pin has a series resistor on 6 of 13 designs, most often 62 Ω (then 10 Ω).
GNDpin 5Connected to: GND 100%
Apin 6Connected to: A connector 77%, SN65HVD230DR 23%
  • Series resistor on 92% · 120 Ω (5), 62 Ω (3), 10 Ω (3)
Bpin 7Connected to: A connector 77%, SN65HVD230DR 23%
  • Series resistor on 46% · 62 Ω (3), 10 Ω (3)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 92% · 100 nF (16), 1 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DIYBMS ESP32 Controller by stuartpittaway, Bms c1 by LibreSolar, DIYBMS ESP32 Controller by Arkariusz and UCB board by bartkepl.

The SN65HVD75DR in open source designs

The gallery holds 21 open source boards using the SN65HVD75DR from 13 GitHub repositories; a typical one measures about 88 × 70 mm and carries around 79 components.

71% are two-layer designs, the rest use four layers or more, and 24% carry an open source license.

The most starred is DIYBMS ESP32 Controller by stuartpittaway.

Microcontrollers on boards using the SN65HVD75DR

What boards using the SN65HVD75DR are built for

SN65HVD75DR: common questions

Where can I find a SN65HVD75DR reference design?

Each of the 21 boards on this page is a real design using the SN65HVD75DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the SN65HVD75DR A pin?

The A pin has a series resistor on 12 of 13 designs, most often 120 Ω (then 62 Ω). Counted from the KiCad layouts of 13 open source designs using the SN65HVD75DR.

What decoupling capacitors do designs use on the SN65HVD75DR VCC pin?

The VCC pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the SN65HVD75DR.

What resistor goes on the SN65HVD75DR B pin?

The B pin has a series resistor on 6 of 13 designs, most often 62 Ω (then 10 Ω). Counted from the KiCad layouts of 13 open source designs using the SN65HVD75DR.

What parts are used alongside the SN65HVD75DR?

The AMS1117-3.3, ESP32-DEVKITC-32D, BQ76952PFBR, EL3H7(B)(TA)-G and ESP32-C3-MINI-1-N4 appear in the most repositories here.

Which microcontrollers do boards using the SN65HVD75DR use?

Most are built on RP2040/RP2350 (9), ESP32 (8), STM32 (2) and AVR/Arduino (1).

How big is a typical board using the SN65HVD75DR?

The median is 88 × 70 mm, and 71% are two-layer designs.

What is the most popular open source board using the SN65HVD75DR?

By GitHub stars, DIYBMS ESP32 Controller by stuartpittaway, with 1,143 stars.

Can I simulate one of these boards using the SN65HVD75DR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part