2 open source boards using the Arduino_Pro_Mini_328
Real designs built with the Arduino_Pro_Mini_328, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
SatNOGS Rotator Controller v2.4
AFS-pt
100 × 80 mm65 parts2LNo license15AVR/Arduino
SatNOGS Rotator Controller v2.4
parsa-novin
100 × 80 mm66 parts2LNo license2
The Arduino_Pro_Mini_328 in open source designs
The gallery holds 2 open source boards using the Arduino_Pro_Mini_328 from 2 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 66 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is SatNOGS Rotator Controller v2.4 by AFS-pt.
Parts used alongside the Arduino_Pro_Mini_328
Microcontrollers on boards using the Arduino_Pro_Mini_328
Arduino_Pro_Mini_328: common questions
Where can I find a Arduino_Pro_Mini_328 reference design?
Each of the 2 boards on this page is a real design using the Arduino_Pro_Mini_328. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the Arduino_Pro_Mini_328?
The PCA9540B, Pololu_Breakout_A4988, Pololu_Dual_MC33926, SN65HVD485EDR and TC74 appear in the most repositories here.
Which microcontrollers do boards using the Arduino_Pro_Mini_328 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the Arduino_Pro_Mini_328?
The median is 100 × 80 mm, and 100% are two-layer designs.
What is the most popular open source board using the Arduino_Pro_Mini_328?
By GitHub stars, SatNOGS Rotator Controller v2.4 by AFS-pt, with 15 stars.
Can I simulate one of these boards using the Arduino_Pro_Mini_328 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.