3 open source boards using the PCA9540B
Real designs built with the PCA9540B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Satnogs rotator controller
tt-laboratories
100 × 80 mm65 parts2LCERN-OHL-1.20AVR/Arduino
SatNOGS Rotator Controller v2.4
AFS-pt
100 × 80 mm65 parts2LNo license15AVR/Arduino
SatNOGS Rotator Controller v2.4
parsa-novin
100 × 80 mm66 parts2LNo license2
The PCA9540B in open source designs
The gallery holds 3 open source boards using the PCA9540B from 3 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 65 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is SatNOGS Rotator Controller v2.4 by AFS-pt.
Parts used alongside the PCA9540B
Microcontrollers on boards using the PCA9540B
PCA9540B: common questions
Where can I find a PCA9540B reference design?
Each of the 3 boards on this page is a real design using the PCA9540B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the PCA9540B?
The Pololu_Dual_MC33926, SN65HVD485EDR, TC74, TPS54360DDA and Arduino_Pro_Mini_328 appear in the most repositories here.
Which microcontrollers do boards using the PCA9540B use?
Most are built on AVR/Arduino (3).
How big is a typical board using the PCA9540B?
The median is 100 × 80 mm, and 100% are two-layer designs.
What is the most popular open source board using the PCA9540B?
By GitHub stars, SatNOGS Rotator Controller v2.4 by AFS-pt, with 15 stars.
Can I simulate one of these boards using the PCA9540B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.