13 open source boards using the AS1115-BSST
Real designs built with the AS1115-BSST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Usbc car module
mickdassive
283 × 159.2 mm350 parts4LGPL-3.03RP2040/RP2350
Alarm
bbokser
71 × 73 mm64 parts2LMIT3ESP8266
Reflowow oven controler
mickdassive
186 × 121.3 mm95 parts2LGPL-3.02AVR/Arduino
Z180 motherboard
Hyiger-Designs
112.8 × 51.7 mm26 parts2LNo license2ESP32
ESP 32 Battle
samcwitte
64.4 × 103.2 mm68 parts4LMIT0Nome
blakesmith
91.4 × 91.4 mm59 parts2LNo license167Display PS Board
zachrjt
55 × 29.5 mm18 parts2LNo license2ESP32
Interface controler
mickdassive
110 × 120 mm109 parts4LNo license0ESP32
ESP 32 Battle 4h
samcwitte
51.9 × 108.5 mm68 parts4LMIT0STM32
Ww
blakesmith
31 × 38 mm45 parts2LNo license167Steering Wheel
Nomalah
136.7 × 95.4 mm29 parts2LNo license0STM32
Clock
blakesmith
45.7 × 58.4 mm25 parts2LNo license167Microchip SAM
Oxidized flash
blakesmith
61 × 21.6 mm19 parts2LNo license167
How designs wire the AS1115-BSST
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the AS1115-BSST connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 7 of 10 designs, most often 10 kΩ (then 2.2 kΩ).
- The SCL pin has a pull-up to 3.3V on 7 of 10 designs, most often 10 kΩ (then 2.2 kΩ).
- The ISET pin has a pull-up to 3.3V on 6 of 10 designs, most often 10 kΩ (then 14 kΩ).
- The VDD pin has a decoupling capacitor on 5 of 9 designs, most often 4.7 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDApin 1 | Connected to: The microcontroller 60%, PI4IOE5V6416LEX 20%, AS1115-BSST 20% |
|
| GNDpin 6 | Connected to: GND 90% | — |
| ISETpin 13 | Connected to: Signal 90% |
|
| SCLpin 14 | Connected to: The microcontroller 60%, PI4IOE5V6416LEX 20%, AS1115-BSST 20% |
|
| VDDpin 19 | Connected to: 3.3V 89% |
|
| IRQpin 24 | Connected to: The microcontroller 33% · not connected 22% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Clock by blakesmith, Alarm by bbokser, Usbc car module by mickdassive and Z180 motherboard by Hyiger-Designs.
The AS1115-BSST in open source designs
The gallery holds 13 open source boards using the AS1115-BSST from 9 GitHub repositories; a typical one measures about 71 × 91.4 mm and carries around 59 components.
69% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Nome by blakesmith.
Parts used alongside the AS1115-BSST
Microcontrollers on boards using the AS1115-BSST
What boards using the AS1115-BSST are built for
AS1115-BSST: common questions
Where can I find a AS1115-BSST reference design?
Each of the 13 boards on this page is a real design using the AS1115-BSST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the AS1115-BSST SDA pin?
The SDA pin has a pull-up to 3.3V on 7 of 10 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 10 open source designs using the AS1115-BSST.
What pull-up resistor is used on the AS1115-BSST SCL pin?
The SCL pin has a pull-up to 3.3V on 7 of 10 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 10 open source designs using the AS1115-BSST.
What pull-up resistor is used on the AS1115-BSST ISET pin?
The ISET pin has a pull-up to 3.3V on 6 of 10 designs, most often 10 kΩ (then 14 kΩ). Counted from the KiCad layouts of 10 open source designs using the AS1115-BSST.
What parts are used alongside the AS1115-BSST?
The LTC-5723HR, ESP32-S2FH2, PI4IOE5V6416LEX and TJA1043T/1J appear in the most repositories here.
Which microcontrollers do boards using the AS1115-BSST use?
Most are built on ESP32 (4), STM32 (2), AVR/Arduino (1) and ESP8266 (1).
How big is a typical board using the AS1115-BSST?
The median is 71 × 91.4 mm, and 69% are two-layer designs.
What is the most popular open source board using the AS1115-BSST?
By GitHub stars, Nome by blakesmith, with 167 stars.
Can I simulate one of these boards using the AS1115-BSST before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.