5 open source boards using the PI4IOE5V6416LEX

Real designs built with the PI4IOE5V6416LEX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the PI4IOE5V6416LEX

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the PI4IOE5V6416LEX connects to, and the resistors, capacitors and other passives placed on it.

  • The RESET pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
  • The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 2.2 kΩ (then 10 kΩ).
  • The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 2.2 kΩ (then 10 kΩ).
  • The INT pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ.
INTpin 1Connected to: The microcontroller 40%
  • Pull-up to 3.3V on 80% · 10 kΩ (4)
VDD_I2Cpin 2Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (1), 10 µF (1)
RESETpin 3Connected to: A connector 80%, the microcontroller 80%, PI4IOE5V6416LEX 40%
  • Pull-up to 3.3V on 100% · 10 kΩ (5)
VSSpin 12Connected to: GND 100%
ADDRpin 21Connected to: GND 60% · 3.3V 40%
SCLpin 22Connected to: The microcontroller 80%, ADS7128 40%, AS1115-BSST 40%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (4), 10 kΩ (1)
SDApin 23Connected to: The microcontroller 80%, ADS7128 40%, AS1115-BSST 40%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (4), 10 kΩ (1)
VDDpin 24Connected to: 3.3V 100%

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Usbc car module by mickdassive, Reflowow oven controler by mickdassive, The Macruwu 2.0 by SirBramble and Boulder clock replacent bord by mickdassive.

The PI4IOE5V6416LEX in open source designs

The gallery holds 5 open source boards using the PI4IOE5V6416LEX from 5 GitHub repositories; a typical one measures about 189 × 110 mm and carries around 208 components.

60% use four copper layers or more, and 40% carry an open source license.

The most starred is Usbc car module by mickdassive.

Microcontrollers on boards using the PI4IOE5V6416LEX

What boards using the PI4IOE5V6416LEX are built for

PI4IOE5V6416LEX: common questions

Where can I find a PI4IOE5V6416LEX reference design?

Each of the 5 boards on this page is a real design using the PI4IOE5V6416LEX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the PI4IOE5V6416LEX RESET pin?

The RESET pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the PI4IOE5V6416LEX.

What pull-up resistor is used on the PI4IOE5V6416LEX SCL pin?

The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the PI4IOE5V6416LEX.

What pull-up resistor is used on the PI4IOE5V6416LEX SDA pin?

The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the PI4IOE5V6416LEX.

What parts are used alongside the PI4IOE5V6416LEX?

The ADS7128, AS1115-BSST, ESP-12F, ESP32-S2FH2 and LTC-5723HR appear in the most repositories here.

Which microcontrollers do boards using the PI4IOE5V6416LEX use?

Most are built on ESP32 (2) and ESP8266 (2).

How big is a typical board using the PI4IOE5V6416LEX?

The median is 189 × 110 mm, and 40% are two-layer designs.

What is the most popular open source board using the PI4IOE5V6416LEX?

By GitHub stars, Usbc car module by mickdassive, with 3 stars.

Can I simulate one of these boards using the PI4IOE5V6416LEX before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part