4 open source boards using the AT24C256C
Real designs built with the AT24C256C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Jag board
soerenmeier
95 × 56 mm51 parts4LApache-2.02STM32
MMS3
ArthorH
100 × 50 mm156 parts4LNo license1FPGA
X16-fpga board
eshankiyer
100 × 100 mm215 parts4LNo license0STM32
GIMBAL
TIEN3915
84.4 × 80.2 mm137 parts2LNo license0
The AT24C256C in open source designs
The gallery holds 4 open source boards using the AT24C256C from 4 GitHub repositories; a typical one measures about 97.5 × 68.1 mm and carries around 147 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is Jag board by soerenmeier.
Parts used alongside the AT24C256C
What boards using the AT24C256C are built for
AT24C256C: common questions
Where can I find a AT24C256C reference design?
Each of the 4 boards on this page is a real design using the AT24C256C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AT24C256C use?
Most are built on STM32 (3) and FPGA (1).
How big is a typical board using the AT24C256C?
The median is 97.5 × 68.1 mm, and 25% are two-layer designs.
What is the most popular open source board using the AT24C256C?
By GitHub stars, Jag board by soerenmeier, with 2 stars.
Can I simulate one of these boards using the AT24C256C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.