2 open source boards using the AT24CS32
Real designs built with the AT24CS32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoHB-LC-Dim6PWM-CV
stan23
139 × 56.3 mm57 parts2LCC-BY-NC-4.021
STM32Hm stm32 2ch dimmer
der-pw
56 × 55.4 mm33 parts2LNo license6
The AT24CS32 in open source designs
The gallery holds 2 open source boards using the AT24CS32 from 2 GitHub repositories; a typical one measures about 97.5 × 55.8 mm and carries around 45 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is HB-LC-Dim6PWM-CV by stan23.
Microcontrollers on boards using the AT24CS32
What boards using the AT24CS32 are built for
AT24CS32: common questions
Where can I find a AT24CS32 reference design?
Each of the 2 boards on this page is a real design using the AT24CS32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AT24CS32 use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the AT24CS32?
The median is 97.5 × 55.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the AT24CS32?
By GitHub stars, HB-LC-Dim6PWM-CV by stan23, with 21 stars.
Can I simulate one of these boards using the AT24CS32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.