4 open source boards using the AT28C64

Real designs built with the AT28C64, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The AT28C64 in open source designs

The gallery holds 4 open source boards using the AT28C64 from 4 GitHub repositories; a typical one measures about 121.9 × 76.8 mm and carries around 42 components.

75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is M68kcomp1 by jtsiomb.

Parts used alongside the AT28C64

What boards using the AT28C64 are built for

AT28C64: common questions

Where can I find a AT28C64 reference design?

Each of the 4 boards on this page is a real design using the AT28C64. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the AT28C64?

The median is 121.9 × 76.8 mm, and 75% are two-layer designs.

What is the most popular open source board using the AT28C64?

By GitHub stars, M68kcomp1 by jtsiomb, with 32 stars.

Can I simulate one of these boards using the AT28C64 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part