3 open source boards using the ATMEGA1284P-PU
Real designs built with the ATMEGA1284P-PU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Keyman64
hbekel
80 × 64.7 mm29 parts2LGPL-3.018- schematic only · 10 partsAVR/Arduino
EduBoard
Ploos-AS
10 partsNo license0 AVR/Arduino
Z80ctrl
jblang
99.8 × 49.9 mm30 parts2LMIT73
The ATMEGA1284P-PU in open source designs
The gallery holds 3 open source boards using the ATMEGA1284P-PU from 3 GitHub repositories; a typical one measures about 89.9 × 57.3 mm and carries around 29 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Z80ctrl by jblang.
Microcontrollers on boards using the ATMEGA1284P-PU
What boards using the ATMEGA1284P-PU are built for
ATMEGA1284P-PU: common questions
Where can I find a ATMEGA1284P-PU reference design?
Each of the 3 boards on this page is a real design using the ATMEGA1284P-PU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATMEGA1284P-PU use?
Most are built on AVR/Arduino (3).
How big is a typical board using the ATMEGA1284P-PU?
The median is 89.9 × 57.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATMEGA1284P-PU?
By GitHub stars, Z80ctrl by jblang, with 73 stars.
Can I simulate one of these boards using the ATMEGA1284P-PU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.