8 open source boards using the ATMEGA32U2-A
Real designs built with the ATMEGA32U2-A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Endeavour-2
ScatteredDrifter
190.5 × 83.2 mm104 parts2LCERN-OHL-P-2.013AVR/Arduino
Dizzy40
str-dst
229 × 80 mm101 parts2LNo license12AVR/Arduino
Eliza
str-dst
259 × 88.3 mm79 parts2LNo license9AVR/Arduino
BM42
str-dst
228 × 78 mm93 parts2LCC-BY-NC-4.07AVR/Arduino
ADB2USBC
KlemensMaentele
33 × 48 mm17 parts2LNo license2AVR/Arduino
Ssd
IanFeldman
102.3 × 33.8 mm21 parts2LNo license1AVR/Arduino
6KeyMacroPad
04jj
57.2 × 57.2 mm45 parts2LNo license0AVR/Arduino
Endeavour-2-backup
ScatteredDrifter
190.5 × 84 mm94 parts2LCERN-OHL-P-2.013
How designs wire the ATMEGA32U2-A
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ATMEGA32U2-A connects to, and the resistors, capacitors and other passives placed on it.
- The XTAL1 pin has a crystal on 7 of 7 designs, most often 16 MHz.
- The XTAL1 pin has a capacitor to GND on 7 of 7 designs, most often 22 pF (then 26 pF).
- The PC0/XTAL2 pin has a crystal on 7 of 7 designs, most often 16 MHz.
- The PC0/XTAL2 pin has a capacitor to GND on 7 of 7 designs, most often 22 pF (then 26 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| XTAL1pin 1 | Connected to: Signal 100% |
|
| PC0/XTAL2pin 2 | Connected to: Signal 100% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 4 | Connected to: 5V 86% |
|
| HWB/PD7pin 13 | Connected to: Signal 100% |
|
| PC1/RESETpin 24 | Connected to: A connector 57% |
|
| PC4pin 26 | Connected to: Not connected 71% · a signal 29% | — |
| UCAPpin 27 | Connected to: Signal 100% |
|
| UGNDpin 28 | Connected to: GND 100% | — |
| D+pin 29 | Connected to: Signal 100% |
|
| D-pin 30 | Connected to: Signal 100% |
|
| UVCCpin 31 | Connected to: 5V 86% |
|
| AVCCpin 32 | Connected to: 5V 86% |
|
19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Endeavour-2 by ScatteredDrifter, Dizzy40 by str-dst, Eliza by str-dst and BM42 by str-dst.
The ATMEGA32U2-A in open source designs
The gallery holds 8 open source boards using the ATMEGA32U2-A from 7 GitHub repositories; a typical one measures about 190.5 × 79 mm and carries around 86 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Endeavour-2 by ScatteredDrifter.
Parts used alongside the ATMEGA32U2-A
Microcontrollers on boards using the ATMEGA32U2-A
What boards using the ATMEGA32U2-A are built for
ATMEGA32U2-A: common questions
Where can I find a ATMEGA32U2-A reference design?
Each of the 8 boards on this page is a real design using the ATMEGA32U2-A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ATMEGA32U2-A XTAL1 pin connected?
The XTAL1 pin has a crystal on 7 of 7 designs, most often 16 MHz. Counted from the KiCad layouts of 7 open source designs using the ATMEGA32U2-A.
How is the ATMEGA32U2-A PC0/XTAL2 pin connected?
The PC0/XTAL2 pin has a crystal on 7 of 7 designs, most often 16 MHz. Counted from the KiCad layouts of 7 open source designs using the ATMEGA32U2-A.
How is the ATMEGA32U2-A UCAP pin connected?
The UCAP pin has a capacitor to GND on 7 of 7 designs, most often 1 µF. Counted from the KiCad layouts of 7 open source designs using the ATMEGA32U2-A.
Which microcontrollers do boards using the ATMEGA32U2-A use?
Most are built on AVR/Arduino (8).
How big is a typical board using the ATMEGA32U2-A?
The median is 190.5 × 79 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATMEGA32U2-A?
By GitHub stars, Endeavour-2 by ScatteredDrifter, with 13 stars.
Can I simulate one of these boards using the ATMEGA32U2-A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.