4 open source boards using the BGB741L7ESDE6327XTSA1
Real designs built with the BGB741L7ESDE6327XTSA1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Hackrf pro
greatscottgadgets
120 × 75 mm503 parts6LCERN-OHL-P-2.063Oresat c3-hardware
oresat
99.8 × 94.6 mm347 parts4LCERN-OHL-S-2.026- schematic only · 503 parts
Hwsec netlist scanner
srisowmya2000
503 partsNo license0 Rf amps
greatscottgadgets
23 × 75 mm59 parts4LGPL-2.021
The BGB741L7ESDE6327XTSA1 in open source designs
The gallery holds 4 open source boards using the BGB741L7ESDE6327XTSA1 from 4 GitHub repositories; a typical one measures about 99.8 × 75 mm and carries around 425 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is Hackrf pro by greatscottgadgets.
Parts used alongside the BGB741L7ESDE6327XTSA1
Microcontrollers on boards using the BGB741L7ESDE6327XTSA1
What boards using the BGB741L7ESDE6327XTSA1 are built for
BGB741L7ESDE6327XTSA1: common questions
Where can I find a BGB741L7ESDE6327XTSA1 reference design?
Each of the 4 boards on this page is a real design using the BGB741L7ESDE6327XTSA1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the BGB741L7ESDE6327XTSA1?
The AT86RF215-ZUR, BDCN-20-13+, FM24CL64B-G, LT5534ESC6#TRPBF and LTC3624IDD-5#PBF appear in the most repositories here.
Which microcontrollers do boards using the BGB741L7ESDE6327XTSA1 use?
Most are built on FPGA (1).
How big is a typical board using the BGB741L7ESDE6327XTSA1?
The median is 99.8 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the BGB741L7ESDE6327XTSA1?
By GitHub stars, Hackrf pro by greatscottgadgets, with 63 stars.
Can I simulate one of these boards using the BGB741L7ESDE6327XTSA1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.