6 open source boards using the OSD3358-512M-BSM
Real designs built with the OSD3358-512M-BSM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pocketbeagle
beagleboard
55 × 35 mm45 partsCC-BY-4.0284Oresat c3-hardware
oresat
99.8 × 94.6 mm347 parts4LCERN-OHL-S-2.026OreSat Live Card
oresat
99.8 × 94.6 mm314 parts4LGPL-3.017Oresat live card
oresat
99.8 × 94.6 mm377 parts4LNo license8Pocketbeagle
jadonk
55 × 35 mm45 partsCC-BY-4.03- schematic only · 503 parts
Hwsec netlist scanner
srisowmya2000
503 partsNo license0
How designs wire the OSD3358-512M-BSM
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the OSD3358-512M-BSM connects to, and the resistors, capacitors and other passives placed on it.
- The LCD_DATA2_G1 pin has a series resistor on 4 of 5 designs, most often 100 kΩ (then 47 kΩ).
- The LCD_DATA1_G2 pin has a series resistor on 4 of 5 designs, most often 100 kΩ (then 47 kΩ).
- The LCD_DATA0_G3 pin has a series resistor on 4 of 5 designs, most often 100 kΩ (then 47 kΩ).
- The LCD_DATA3_H3 pin has a series resistor on 4 of 5 designs, most often 100 kΩ (then 47 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MCASP0_ACLKX_A1pin A1 | Connected to: Not connected 67% · a signal 33% | — |
| MCASP0_FSX_A2pin A2 | Connected to: Not connected 67% · a signal 33% | — |
| MCASP0_ACLKR_A3pin A3 | Connected to: Not connected 67% · a signal 33% | — |
| OSC1_OUT_A5pin A5 | Connected to: Signal 100% |
|
| OSC1_IN_A6pin A6 | Connected to: Signal 100% |
|
| SYS_ADC_1P8V_A7pin A7 | Connected to: Signal 67% · 1.8V 33% |
|
| UART1_RTSN_A10pin A10 | Connected to: Not connected 67% · a signal 33% | — |
| MMC0_DAT1_A15pin A15 | Connected to: A connector 100% |
|
| MMC0_DAT0_A16pin A16 | Connected to: A connector 100% |
|
| MCASP0_AHCLKR_B1pin B1 | Connected to: Not connected 67% · a signal 33% | — |
| MCASP0_AXR0_B2pin B2 | Connected to: Not connected 67% · a signal 33% | — |
| MCASP0_FSR_B3pin B3 | Connected to: Not connected 67% · a signal 33% | — |
| XDMA_EVENT_INTR1_B4pin B4 | Connected to: Not connected 67% · a signal 33% | — |
| OSC1_GND_B5pin B5 | Connected to: Signal 100% |
|
| UART1_CTSN_B10pin B10 | Connected to: Not connected 67% · a signal 33% | — |
| MMC0_CLK_B15pin B15 | Connected to: A connector 100% |
|
| MMC0_CMD_B16pin B16 | Connected to: A connector 100% |
|
| MCASP0_AXR1_C3pin C3 | Connected to: Not connected 67% · a signal 33% | — |
| MCASP0_AHCLKX_C4pin C4 | Connected to: Not connected 67% · a signal 33% | — |
| SPI0_CS1_C14pin C14 | Connected to: A connector 100% |
|
| MMC0_DAT3_C15pin C15 | Connected to: A connector 100% |
|
| MMC0_DAT2_C16pin C16 | Connected to: A connector 100% |
|
| TRSTN_D3pin D3 | Connected to: Signal 67% · not connected 33% |
|
| CAP_VDD_RTC_D5pin D5 | Connected to: Not connected 67% · a signal 33% | — |
| DGND@1_D8pin D8 | Connected to: GND 100% | — |
| DGND@2_D9pin D9 | Connected to: GND 100% | — |
| NC@1_D12pin D12 | Connected to: Not connected 67% · a signal 33% | — |
| MII1_RXD3_D14pin D14 | Connected to: Not connected 67% · a signal 33% | — |
| MII1_RXD2_D15pin D15 | Connected to: Not connected 67% · a signal 33% | — |
| MII1_RXD1_D16pin D16 | Connected to: Not connected 67% · a signal 33% | — |
| EMU0_E2pin E2 | Connected to: Signal 67% · not connected 33% |
|
| EMU1_E3pin E3 | Connected to: Signal 67% · not connected 33% |
|
| DGND@3_E5pin E5 | Connected to: GND 100% | — |
| DGND@4_E6pin E6 | Connected to: GND 100% | — |
| DGND@5_E7pin E7 | Connected to: GND 100% | — |
| DGND@6_E8pin E8 | Connected to: GND 100% | — |
| DGND@7_E9pin E9 | Connected to: GND 100% | — |
| DGND@8_E10pin E10 | Connected to: GND 100% | — |
| DGND@9_E11pin E11 | Connected to: GND 100% | — |
| DGND@10_E12pin E12 | Connected to: GND 100% | — |
216 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pocketbeagle by beagleboard, Oresat c3-hardware by oresat, OreSat Live Card by oresat and Oresat live card by oresat.
The OSD3358-512M-BSM in open source designs
The gallery holds 6 open source boards using the OSD3358-512M-BSM from 6 GitHub repositories; a typical one measures about 99.8 × 94.6 mm and carries around 331 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Pocketbeagle by beagleboard.
Parts used alongside the OSD3358-512M-BSM
What boards using the OSD3358-512M-BSM are built for
OSD3358-512M-BSM: common questions
Where can I find a OSD3358-512M-BSM reference design?
Each of the 6 boards on this page is a real design using the OSD3358-512M-BSM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the OSD3358-512M-BSM LCD_DATA2_G1 pin?
The LCD_DATA2_G1 pin has a series resistor on 4 of 5 designs, most often 100 kΩ (then 47 kΩ). Counted from the KiCad layouts of 5 open source designs using the OSD3358-512M-BSM.
What resistor goes on the OSD3358-512M-BSM LCD_DATA1_G2 pin?
The LCD_DATA1_G2 pin has a series resistor on 4 of 5 designs, most often 100 kΩ (then 47 kΩ). Counted from the KiCad layouts of 5 open source designs using the OSD3358-512M-BSM.
What resistor goes on the OSD3358-512M-BSM LCD_DATA0_G3 pin?
The LCD_DATA0_G3 pin has a series resistor on 4 of 5 designs, most often 100 kΩ (then 47 kΩ). Counted from the KiCad layouts of 5 open source designs using the OSD3358-512M-BSM.
What parts are used alongside the OSD3358-512M-BSM?
The LTC3624IDD-5#PBF, RCLAMP0504FBTCT, SN74AUC1G07DCKR, SN74LVC1G07DCK and AT86RF215-ZUR appear in the most repositories here.
How big is a typical board using the OSD3358-512M-BSM?
The median is 99.8 × 94.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the OSD3358-512M-BSM?
By GitHub stars, Pocketbeagle by beagleboard, with 284 stars.
Can I simulate one of these boards using the OSD3358-512M-BSM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.