3 open source boards using the BMP585

Real designs built with the BMP585, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The BMP585 in open source designs

The gallery holds 3 open source boards using the BMP585 from 3 GitHub repositories; a typical one measures about 50 × 38.6 mm and carries around 112 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Triangulate-ES 01-Watch by sandgum.

Microcontrollers on boards using the BMP585

BMP585: common questions

Where can I find a BMP585 reference design?

Each of the 3 boards on this page is a real design using the BMP585. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the BMP585 use?

Most are built on ESP32 (1), Raspberry Pi (1) and STM32 (1).

How big is a typical board using the BMP585?

The median is 50 × 38.6 mm, and 0% are two-layer designs.

What is the most popular open source board using the BMP585?

By GitHub stars, Triangulate-ES 01-Watch by sandgum, with 22 stars.

Can I simulate one of these boards using the BMP585 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part