9 open source boards using the BQ25171QWDRCRQ1
Real designs built with the BQ25171QWDRCRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sisu SSE-9
briskspirit
43.9 × 118.2 mm259 parts6LUnlicense18ESP32
ILI9341 ESP32 GBC
theBrutzler
70 × 122.3 mm111 parts2LNo license9Klayout macos release
New-Seagull-Work-Inc
150 × 140 mm59 parts2LCustom license6ESP32
ILI9341 ESP32
theBrutzler
129.1 × 81 mm161 parts2LNo license2Klayout windows release
New-Seagull-Work-Inc
150 × 140 mm59 parts2LCustom license2Klayout linux release
raulizahi
150 × 140 mm59 parts2LCustom license2ESP32
Lacarriere station
pier-cbd
92 × 92 mm78 parts2LNo license0Klayout linux release
New-Seagull-Work-Inc
150 × 140 mm59 parts2LCustom license0ILI9341 ESP32 CARD
theBrutzler
79.6 × 80.3 mm82 parts2LNo license2
How designs wire the BQ25171QWDRCRQ1
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the BQ25171QWDRCRQ1 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 8 of 8 designs, most often 22 µF (then 4.7 µF).
- The OUT pin has a capacitor to GND on 8 of 8 designs, most often 22 µF (then 1 µF).
- The ISET pin has a resistor to GND on 7 of 8 designs, most often 600 Ω (then 1.1 kΩ).
- The CHM_TMR pin has a resistor to GND on 7 of 8 designs, most often 100 kΩ (then 36 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: AP63205WU-7 50% |
|
| ISETpin 2 | Connected to: Signal 100% |
|
| CEpin 3 | Connected to: GND 63% · a signal 38% | — |
| TSpin 4 | Connected to: Signal 100% |
|
| GNDpin 5 | Connected to: GND 100% | — |
| CHM_TMRpin 6 | Connected to: Signal 100% |
|
| VSETpin 9 | Connected to: Signal 100% |
|
| OUTpin 10 | Connected to: TPS61088RHLR 50% · VBATT 38% |
|
| EPpin 11 | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sisu SSE-9 by briskspirit, ILI9341 ESP32 GBC by theBrutzler, Klayout macos release by New-Seagull-Work-Inc and Klayout windows release by New-Seagull-Work-Inc.
The BQ25171QWDRCRQ1 in open source designs
The gallery holds 9 open source boards using the BQ25171QWDRCRQ1 from 8 GitHub repositories; a typical one measures about 129.1 × 122.3 mm and carries around 78 components.
89% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is Sisu SSE-9 by briskspirit.
Parts used alongside the BQ25171QWDRCRQ1
Microcontrollers on boards using the BQ25171QWDRCRQ1
What boards using the BQ25171QWDRCRQ1 are built for
BQ25171QWDRCRQ1: common questions
Where can I find a BQ25171QWDRCRQ1 reference design?
Each of the 9 boards on this page is a real design using the BQ25171QWDRCRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ25171QWDRCRQ1 IN pin connected?
The IN pin has a capacitor to GND on 8 of 8 designs, most often 22 µF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the BQ25171QWDRCRQ1.
How is the BQ25171QWDRCRQ1 OUT pin connected?
The OUT pin has a capacitor to GND on 8 of 8 designs, most often 22 µF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the BQ25171QWDRCRQ1.
What resistor goes on the BQ25171QWDRCRQ1 ISET pin?
The ISET pin has a resistor to GND on 7 of 8 designs, most often 600 Ω (then 1.1 kΩ). Counted from the KiCad layouts of 8 open source designs using the BQ25171QWDRCRQ1.
What parts are used alongside the BQ25171QWDRCRQ1?
The AP63205WU-7, LM76003RNPT, LTC4412ES6#TRPBF, TPS61088RHLR and TPS61028DRCR appear in the most repositories here.
Which microcontrollers do boards using the BQ25171QWDRCRQ1 use?
Most are built on ESP32 (3).
How big is a typical board using the BQ25171QWDRCRQ1?
The median is 129.1 × 122.3 mm, and 89% are two-layer designs.
What is the most popular open source board using the BQ25171QWDRCRQ1?
By GitHub stars, Sisu SSE-9 by briskspirit, with 18 stars.
Can I simulate one of these boards using the BQ25171QWDRCRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.