8 open source boards using the BQ25713RSNR
Real designs built with the BQ25713RSNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mynd Main
teufelaudio
75 × 136 mm560 parts4LCC-BY-SA-4.076100W-Charging
Redherring32
38.5 × 38.5 mm84 parts4LTAPR-OHL-1.043STM32
Ducker-Charger
Angelussss
66.4 × 163.6 mm256 parts4LCC-BY-NC-4.018STM32
Mynd Main
Prototype-Fund-Hardware
75 × 136 mm560 parts4LNo license3Nordic nRF
FindMyCharger
dave9123
74 × 56 mm189 parts4LNo license1ESP32
Sthymuli motherboard
nathmo
153.6 × 66.2 mm189 parts4LCustom license0ESP32
Motherboard
Sthymuli
153.6 × 66.2 mm189 parts4LCustom license0ESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
How designs wire the BQ25713RSNR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the BQ25713RSNR connects to, and the resistors, capacitors and other passives placed on it.
- The SDA_12 pin has a series resistor on 8 of 8 designs, most often 0 Ω (then 2.2 kΩ).
- The SCL_13 pin has a series resistor on 8 of 8 designs, most often 0 Ω (then 2.2 kΩ).
- The COMP1_16 pin has a capacitor to GND on 8 of 8 designs, most often 33 pF.
- The COMP1_16 pin has a series resistor on 8 of 8 designs, most often 40.2 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBUS_1pin 1 | Connected to: Signal 75% · VBUS 25% |
|
| ACN_2pin 2 | Connected to: Signal 100% |
|
| ACP_3pin 3 | Connected to: Signal 100% |
|
| CHRG_OK_4pin 4 | Connected to: The microcontroller 25%, C47023 25% |
|
| ILIM_HIZ_6pin 6 | Connected to: Signal 88% |
|
| VDDA_7pin 7 | Connected to: VDDA 63% · a signal 38% |
|
| IADPT_8pin 8 | Connected to: The microcontroller 25% |
|
| IBAT_9pin 9 | Connected to: The microcontroller 25% |
|
| PSYS_10pin 10 | Connected to: Signal 75% |
|
| PROCHOT_11pin 11 | Connected to: Not connected 63% · a signal 38% |
|
| SDA_12pin 12 | Connected to: A connector 25%, FT24C512A-TSR-T 25%, C22394458 25% |
|
| SCL_13pin 13 | Connected to: A connector 25%, FT24C512A-TSR-T 25%, C22394458 25% |
|
| CMPIN_14pin 14 | Connected to: Not connected 38% · GND 25% · a signal 38% |
|
| CMPOUT_15pin 15 | Connected to: Not connected 50% · a signal 50% |
|
| COMP1_16pin 16 | Connected to: Signal 100% |
|
| COMP2_17pin 17 | Connected to: Signal 100% |
|
| CELL_BATPRESZ_18pin 18 | Connected to: Signal 100% |
|
| SRN_19pin 19 | Connected to: Signal 100% |
|
| SRP_20pin 20 | Connected to: Signal 100% |
|
| VSYS_22pin 22 | Connected to: VSYS 63% · a signal 38% |
|
| SW2_23pin 23 | Connected to: Signal 100% |
|
| BTST2_25pin 25 | Connected to: Signal 100% |
|
| PGND_27pin 27 | Connected to: GND 100% | — |
| REGN_28pin 28 | Connected to: Signal 88% |
|
| BTST1_30pin 30 | Connected to: Signal 100% |
|
| SW1_32pin 32 | Connected to: Signal 100% |
|
| PADpin 33 | Connected to: GND 60% · not connected 40% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Powertrain by byrantech, Mynd Main by teufelaudio, 100W-Charging-PCB by Redherring32 and Ducker-Charger by Angelussss.
The BQ25713RSNR in open source designs
The gallery holds 8 open source boards using the BQ25713RSNR from 8 GitHub repositories; a typical one measures about 74.5 × 66.2 mm and carries around 189 components.
100% use four copper layers or more, and 38% carry an open source license.
The most starred is Powertrain by byrantech.
Parts used alongside the BQ25713RSNR
Microcontrollers on boards using the BQ25713RSNR
What boards using the BQ25713RSNR are built for
BQ25713RSNR: common questions
Where can I find a BQ25713RSNR reference design?
Each of the 8 boards on this page is a real design using the BQ25713RSNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the BQ25713RSNR SDA_12 pin?
The SDA_12 pin has a series resistor on 8 of 8 designs, most often 0 Ω (then 2.2 kΩ). Counted from the KiCad layouts of 8 open source designs using the BQ25713RSNR.
What resistor goes on the BQ25713RSNR SCL_13 pin?
The SCL_13 pin has a series resistor on 8 of 8 designs, most often 0 Ω (then 2.2 kΩ). Counted from the KiCad layouts of 8 open source designs using the BQ25713RSNR.
How is the BQ25713RSNR COMP1_16 pin connected?
The COMP1_16 pin has a capacitor to GND on 8 of 8 designs, most often 33 pF. Counted from the KiCad layouts of 8 open source designs using the BQ25713RSNR.
What parts are used alongside the BQ25713RSNR?
The TPS54302DDCR, C145745, C1880390, C2150198 and C22394458 appear in the most repositories here.
Which microcontrollers do boards using the BQ25713RSNR use?
Most are built on ESP32 (3), STM32 (3) and Nordic nRF (1).
How big is a typical board using the BQ25713RSNR?
The median is 74.5 × 66.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the BQ25713RSNR?
By GitHub stars, Powertrain by byrantech, with 4,264 stars.
Can I simulate one of these boards using the BQ25713RSNR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.