6 open source boards using the BQ27441DRZT-G1A

Real designs built with the BQ27441DRZT-G1A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the BQ27441DRZT-G1A

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the BQ27441DRZT-G1A connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_5 pin has a capacitor to GND on 6 of 6 designs, most often 470 nF (then 1 µF).
  • The SRP_8 pin has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 100 nF).
  • The NC_4 pin is left unconnected on 6 of 6 designs.
  • The NC_9 pin is left unconnected on 6 of 6 designs.
SDA_1pin 1Connected to: The microcontroller 83%, TCA6416ARTWR 33%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (3), 5.1 kΩ (1)
SCL_2pin 2Connected to: The microcontroller 83%, TCA6416ARTWR 33%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (3), 5.1 kΩ (1)
VSS_3pin 3Connected to: GND 100%
NC_4pin 4Connected to: Not connected 100%
VDD_5pin 5Connected to: Signal 67% · VDD_BQ27441 33%
  • Capacitor to GND on 100% · 470 nF (5), 1 µF (1)
BAT_6pin 6Connected to: A connector 50% · VBATT 33%
  • Capacitor to GND on 67% · 1 µF (4), 100 nF (1)
  • Series resistor on 33% · 10 mΩ (2), 100 kΩ (1)
  • Pull-up to VBAT on 33% · 10 mΩ (2)
SRN_7pin 7Connected to: MCP73831T-2ACI_MC 33% · VBAT_SYS 33%
  • Series resistor on 33% · 10 mΩ (2)
  • Capacitor to GND on 33% · 4.7 µF (2)
  • Pull-up to VBATT on 33% · 10 mΩ (2)
SRP_8pin 8Connected to: A connector 50% · VBATT 33%
  • Capacitor to GND on 100% · 1 µF (6), 100 nF (1)
  • Series resistor on 33% · 10 mΩ (2), 100 kΩ (1)
  • Pull-up to VBAT on 33% · 10 mΩ (2)
NC_9pin 9Connected to: Not connected 100%
BIN_10pin 10Connected to: Signal 83% · not connected 17%
  • Resistor to GND on 83% · 10 kΩ (5)
NC_11pin 11Connected to: Not connected 100%
GPOUT_12pin 12Connected to: Signal 100%
  • Pull-up to 3.3V on 83% · 10 kΩ (5)
PAD_13pin 13Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include The 4DS by Astronuat21, Audiotest by aherbez, Game2 by aherbez and Secure edge logger by landjas09.

The BQ27441DRZT-G1A in open source designs

The gallery holds 6 open source boards using the BQ27441DRZT-G1A from 6 GitHub repositories; a typical one measures about 90 × 91 mm and carries around 86 components.

100% use four copper layers or more, and 17% carry an open source license.

The most starred is The 4DS by Astronuat21.

Microcontrollers on boards using the BQ27441DRZT-G1A

What boards using the BQ27441DRZT-G1A are built for

BQ27441DRZT-G1A: common questions

Where can I find a BQ27441DRZT-G1A reference design?

Each of the 6 boards on this page is a real design using the BQ27441DRZT-G1A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the BQ27441DRZT-G1A VDD_5 pin connected?

The VDD_5 pin has a capacitor to GND on 6 of 6 designs, most often 470 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the BQ27441DRZT-G1A.

How is the BQ27441DRZT-G1A SRP_8 pin connected?

The SRP_8 pin has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the BQ27441DRZT-G1A.

How is the BQ27441DRZT-G1A NC_4 pin connected?

The NC_4 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the BQ27441DRZT-G1A.

What parts are used alongside the BQ27441DRZT-G1A?

The ER-TFT023-1, ESP32-PICO-D4, FT231XQ-R, MAX98357AEWL+T and MCP73831T-2ACI/MC appear in the most repositories here.

Which microcontrollers do boards using the BQ27441DRZT-G1A use?

Most are built on ESP32 (2), RP2040/RP2350 (2), Raspberry Pi (1) and STM32 (1).

How big is a typical board using the BQ27441DRZT-G1A?

The median is 90 × 91 mm, and 0% are two-layer designs.

What is the most popular open source board using the BQ27441DRZT-G1A?

By GitHub stars, The 4DS by Astronuat21, with 5 stars.

Can I simulate one of these boards using the BQ27441DRZT-G1A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part