14 open source boards using the FT231XQ-R
Real designs built with the FT231XQ-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Main board
elkel53930
84 × 114 mm104 parts2LMIT2ESP32
Main board
elkel53930
70 × 75.9 mm94 parts2LNo license2FPGA
Project byte hamr
robertrico
97.6 × 74.8 mm91 parts4LMIT2PIC
UPIC46
emertcakir
66.6 × 41.3 mm90 parts2LMIT2STM32
Final handsEMG
blakep7
85.9 × 94.4 mm200 parts4LNo license1FPGA
ECP5 BGA381 RISCV
gildobjanschi
54.6 × 54.6 mm108 parts4LMIT1ESP32
Twilight2
elkel53930
80 × 80 mm161 parts4LNo license0FPGA
Gammapi zero
vikulin
65 × 30 mm142 parts4LSHL-2.10FPGA
ECP5 BGA381 FT2232HQ FIFO
gildobjanschi
64.4 × 54.6 mm138 parts4LMIT0RP2040/RP2350
Game2
aherbez
58 × 104 mm79 parts4LNo license0RP2040/RP2350
Audiotest
aherbez
58 × 104 mm79 parts4LNo license0ESP32
Esp32-drone
Sagaz0501
43.7 × 43.7 mm71 parts2LMIT0AVR/Arduino
Arm board
elkel53930
39 × 31 mm39 parts2LMIT2Ovc5
osrf
98 × 97 mm197 parts6LApache-2.0207
How designs wire the FT231XQ-R
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the FT231XQ-R connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3OUT pin has a capacitor to GND on 10 of 12 designs, most often 100 nF.
- The RESET pin has a capacitor to GND on 10 of 12 designs, most often 100 nF (then 10 nF).
- The VCC pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 4.7 µF).
- The VCCIO pin has a capacitor to GND on 9 of 12 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RIpin 2 | Connected to: Not connected 69% · a signal 23% | — |
| GNDpin 3, 13, 21 | Connected to: GND 95% | — |
| DSRpin 4 | Connected to: Not connected 69% · a signal 31% | — |
| DCDpin 5 | Connected to: Not connected 69% · a signal 31% | — |
| CBUS2pin 7 | Connected to: Not connected 62% · a signal 38% | — |
| USBDPpin 8 | Connected to: Signal 92% |
|
| USBDMpin 9 | Connected to: Signal 100% |
|
| 3V3OUTpin 10 | Connected to: Signal 67% · 3.3V 25% |
|
| RESETpin 11 | Connected to: Signal 83% · 5V 17% |
|
| VCCpin 12 | Connected to: 5V 75% · a signal 25% |
|
| CBUS0pin 15 | Connected to: Not connected 67% · a signal 33% | — |
| CBUS3pin 16 | Connected to: Not connected 83% · a signal 17% | — |
| VCCIOpin 20 | Connected to: Signal 58% · 3.3V 42% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ovc5 by osrf, Main board by elkel53930, Arm board by elkel53930 and UPIC46 by emertcakir.
The FT231XQ-R in open source designs
The gallery holds 14 open source boards using the FT231XQ-R from 13 GitHub repositories; a typical one measures about 65.8 × 75.4 mm and carries around 99 components.
64% use four copper layers or more, and 57% carry an open source license.
The most starred is Ovc5 by osrf.
Parts used alongside the FT231XQ-R
Microcontrollers on boards using the FT231XQ-R
What boards using the FT231XQ-R are built for
FT231XQ-R: common questions
Where can I find a FT231XQ-R reference design?
Each of the 14 boards on this page is a real design using the FT231XQ-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the FT231XQ-R 3V3OUT pin connected?
The 3V3OUT pin has a capacitor to GND on 10 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the FT231XQ-R.
How is the FT231XQ-R RESET pin connected?
The RESET pin has a capacitor to GND on 10 of 12 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 13 open source designs using the FT231XQ-R.
What decoupling capacitors do designs use on the FT231XQ-R VCC pin?
The VCC pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the FT231XQ-R.
What parts are used alongside the FT231XQ-R?
The BD63573NUV, LM74700QDBVRQ1, LSM6DSR, MCP73213T-A6SI/MF and OKL-T/6-W12N-C appear in the most repositories here.
Which microcontrollers do boards using the FT231XQ-R use?
Most are built on ESP32 (4), FPGA (4), RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the FT231XQ-R?
The median is 65.8 × 75.4 mm, and 36% are two-layer designs.
What is the most popular open source board using the FT231XQ-R?
By GitHub stars, Ovc5 by osrf, with 207 stars.
Can I simulate one of these boards using the FT231XQ-R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.