8 open source boards using the BQ51013BRHLR

Real designs built with the BQ51013BRHLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the BQ51013BRHLR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the BQ51013BRHLR connects to, and the resistors, capacitors and other passives placed on it.

  • The AC1 pin has a series capacitor on 6 of 6 designs, most often 22 nF (then 100 nF).
  • The BOOT1 pin has a series capacitor on 6 of 6 designs, most often 10 nF (then 22 nF).
  • The CLMP1 pin has a series capacitor on 6 of 6 designs, most often 470 nF (then 22 nF).
  • The COM1 pin has a series capacitor on 6 of 6 designs, most often 22 nF (then 47 nF).
PGNDpin 1, 20Connected to: GND 100%
AC1pin 2Connected to: Signal 100%
  • Series capacitor on 100% · 22 nF (7), 100 nF (5), 10 nF (5)
BOOT1pin 3Connected to: Signal 100%
  • Series capacitor on 100% · 10 nF (4), 22 nF (1)
OUTpin 4Connected to: Signal 67% · VCC 33%
  • Capacitor to GND on 67% · 1 µF (2), 22 µF (1), 100 nF (1)
CLMP1pin 5Connected to: Signal 100%
  • Series capacitor on 100% · 470 nF (4), 22 nF (1)
COM1pin 6Connected to: Signal 100%
  • Series capacitor on 100% · 22 nF (4), 47 nF (1)
CHGpin 7Connected to: Signal 67% · not connected 17% · GND 17%
  • Series resistor on 33% · 1 kΩ (1), 1.5 kΩ (1)
ADpin 9Connected to: Signal 50% · GND 33% · VBUS 17%
  • Capacitor to GND on 67% · 1 µF (3)
EN1pin 10Connected to: Signal 50% · not connected 17% · GND 33%
  • Resistor to GND on 33% · 10 kΩ (2)
EN2pin 11Connected to: Signal 50% · not connected 17% · GND 33%
  • Resistor to GND on 33% · 10 kΩ (2)
ILIMpin 12Connected to: Signal 100%
  • Series resistor on 100% · 110 Ω (1), 560 Ω (1), 33 Ω (1)
TS-CTRLpin 13Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (5)
FODpin 14Connected to: Signal 100%
  • Series resistor on 100% · 10 kΩ (2), 20 kΩ (2), 110 Ω (1)
  • Resistor to GND on 100% · 200 Ω (2), 150 Ω (1), 2.2 kΩ (1)
COM2pin 15Connected to: Signal 100%
  • Series capacitor on 100% · 22 nF (4), 47 nF (1)
CLMP2pin 16Connected to: Signal 100%
  • Series capacitor on 100% · 470 nF (4), 22 nF (1)
BOOT2pin 17Connected to: Signal 100%
  • Series capacitor on 100% · 10 nF (4), 22 nF (1)
RECTpin 18Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (5), 22 µF (1), 4.7 µF (1)
  • Series resistor on 83% · 10 kΩ (2), 20 kΩ (2)
AC2pin 19Connected to: Signal 100%
  • Series capacitor on 100% · 22 nF (6), 10 nF (4), 470 nF (4)
  • Inductor on 33% · 15.3 µH (1)
EPADpin 21Connected to: GND 83% · not connected 17%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Timeleapcam by hnz1102, InkCard by Irony95, Pcb business card by AG2048 and Smartbag core by claudiofin.

The BQ51013BRHLR in open source designs

The gallery holds 8 open source boards using the BQ51013BRHLR from 6 GitHub repositories; a typical one measures about 51.2 × 42.1 mm and carries around 87 components.

75% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Timeleapcam by hnz1102.

Microcontrollers on boards using the BQ51013BRHLR

What boards using the BQ51013BRHLR are built for

BQ51013BRHLR: common questions

Where can I find a BQ51013BRHLR reference design?

Each of the 8 boards on this page is a real design using the BQ51013BRHLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the BQ51013BRHLR AC1 pin connected?

The AC1 pin has a series capacitor on 6 of 6 designs, most often 22 nF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the BQ51013BRHLR.

How is the BQ51013BRHLR BOOT1 pin connected?

The BOOT1 pin has a series capacitor on 6 of 6 designs, most often 10 nF (then 22 nF). Counted from the KiCad layouts of 6 open source designs using the BQ51013BRHLR.

How is the BQ51013BRHLR CLMP1 pin connected?

The CLMP1 pin has a series capacitor on 6 of 6 designs, most often 470 nF (then 22 nF). Counted from the KiCad layouts of 6 open source designs using the BQ51013BRHLR.

Which microcontrollers do boards using the BQ51013BRHLR use?

Most are built on ESP32 (2), AVR/Arduino (1), Nordic nRF (1) and RP2040/RP2350 (1).

How big is a typical board using the BQ51013BRHLR?

The median is 51.2 × 42.1 mm, and 75% are two-layer designs.

What is the most popular open source board using the BQ51013BRHLR?

By GitHub stars, Timeleapcam by hnz1102, with 39 stars.

Can I simulate one of these boards using the BQ51013BRHLR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part