2 open source boards using the BQ7790512PWR

Real designs built with the BQ7790512PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The BQ7790512PWR in open source designs

The gallery holds 2 open source boards using the BQ7790512PWR from 2 GitHub repositories; a typical one measures about 99.4 × 72 mm and carries around 216 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is One air max by claynicholson.

Microcontrollers on boards using the BQ7790512PWR

What boards using the BQ7790512PWR are built for

BQ7790512PWR: common questions

Where can I find a BQ7790512PWR reference design?

Each of the 2 boards on this page is a real design using the BQ7790512PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the BQ7790512PWR?

The AT24CM02-SSHD-B, ESP32-C6-WROOM-1-N8, TPL5010DDCR, TPS2117DRLR_C22399676 and TPS27081ADDCR appear in the most repositories here.

Which microcontrollers do boards using the BQ7790512PWR use?

Most are built on ESP32 (2).

How big is a typical board using the BQ7790512PWR?

The median is 99.4 × 72 mm, and 0% are two-layer designs.

What is the most popular open source board using the BQ7790512PWR?

By GitHub stars, One air max by claynicholson, with 102 stars.

Can I simulate one of these boards using the BQ7790512PWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part