5 open source boards using the C910544

Real designs built with the C910544, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the C910544

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the C910544 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a capacitor to GND on 4 of 4 designs, most often 10 µF (then 100 nF).
  • The N.C._5 pin is left unconnected on 4 of 4 designs.
  • The N.C._6 pin is left unconnected on 4 of 4 designs.
  • The N.C._12 pin is left unconnected on 4 of 4 designs.
GAIN_SLOTpin 2Connected to: 3.3V 40% · not connected 20% · a signal 40%
  • Capacitor to GND on 40% · 10 µF (3), 100 pF (2), 100 nF (1)
GNDpin 3, 11, 15Connected to: GND 92%
SD_MODEpin 4Connected to: Signal 75% · 3.3V 25%
  • Series resistor on 75% · 0 Ω (1), 210 kΩ (1), 750 kΩ (1)
N.C._5pin 5Connected to: Not connected 100%
N.C._6pin 6Connected to: Not connected 100%
VDDpin 7, 8Connected to: 3.3V 50% · a signal 50%
  • Capacitor to GND on 100% · 10 µF (14), 100 nF (4), 100 pF (4)
  • Series resistor on 50% · 330 Ω (2), 470 kΩ (2)
N.C._12pin 12Connected to: Not connected 100%
N.C._13pin 13Connected to: Not connected 100%
EPpin 17Connected to: GND 100%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Oomwoo pcb by makerspet, RP2350A QFN-60 Minimal Design Example by MaverickUK, Left board by flof-codes and Seadream-Rocketry-Avionics by BarneyRye.

The C910544 in open source designs

The gallery holds 5 open source boards using the C910544 from 5 GitHub repositories; a typical one measures about 52 × 51 mm and carries around 40 components.

80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Oomwoo pcb by makerspet.

Microcontrollers on boards using the C910544

C910544: common questions

Where can I find a C910544 reference design?

Each of the 5 boards on this page is a real design using the C910544. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the C910544 VDD pin connected?

The VDD pins have a capacitor to GND on 4 of 4 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the C910544.

How is the C910544 N.C._5 pin connected?

The N.C._5 pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the C910544.

How is the C910544 N.C._6 pin connected?

The N.C._6 pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the C910544.

Which microcontrollers do boards using the C910544 use?

Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the C910544?

The median is 52 × 51 mm, and 80% are two-layer designs.

What is the most popular open source board using the C910544?

By GitHub stars, Oomwoo pcb by makerspet, with 42 stars.

Can I simulate one of these boards using the C910544 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part