9 open source boards using the CD40106
Real designs built with the CD40106, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
810
minisystem
148 × 110 mm327 parts2LNo license10Bmmx
Bemeier
40 × 110 mm145 parts4LNo license4- schematic only · 12 parts
Perfboard-AutoRoute-3D
Tomjiang678
12 partsMIT2 Hat
DagaVedant216.8 × 226.3 mm89 parts4LNo license1Lab 09
MVaugn
167.6 × 114.3 mm107 parts2LNo license0Pulses plus submin v2
MissingMileModular
39.2 × 110 mm89 parts2LCC-BY-NC-4.00Pulses plus submin v2
kuangmk11
39.2 × 110 mm89 parts2LCC-BY-NC-4.00RP2040/RP2350
Pumps
DagaVedant330 × 225.9 mm86 parts4LNo license1AVR/Arduino
Laser-Guided Tracking Servo Breadboard
MVaugn
182.9 × 114.3 mm66 parts2LNo license0
How designs wire the CD40106
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the CD40106 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 10 is left unconnected on 6 of 6 designs.
- Pin 11 is tied to GND on 5 of 6 designs.
- Pin 2 is left unconnected on 4 of 6 designs (a signal on 2).
- Pin 3 is left unconnected on 4 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 83% · GND 17% |
|
| Pin 2 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 3 | Connected to: Not connected 67% · GND 17% · a signal 17% | — |
| Pin 4 | Connected to: Signal 67% · not connected 33% |
|
| Pin 5 | Connected to: Signal 67% · GND 33% |
|
| Pin 6 | Connected to: Not connected 67% · a signal 33% | — |
| VSS_7pin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: Signal 67% · not connected 33% |
|
| Pin 9 | Connected to: Not connected 33% · GND 33% · a signal 33% |
|
| Pin 10 | Connected to: Not connected 100% | — |
| Pin 11 | Connected to: GND 83% · not connected 17% | — |
| Pin 12 | Connected to: Not connected 50% · a signal 50% |
|
| Pin 13 | Connected to: GND 50% · a signal 50% |
|
| VDD_14pin 14 | Connected to: 12V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 810 by minisystem, Bmmx by Bemeier, Hat by DagaVedant and Pulses plus submin v2 by kuangmk11.
The CD40106 in open source designs
The gallery holds 9 open source boards using the CD40106 from 7 GitHub repositories; a typical one measures about 157.8 × 112.2 mm and carries around 89 components.
63% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is 810 by minisystem.
Parts used alongside the CD40106
Microcontrollers on boards using the CD40106
What boards using the CD40106 are built for
CD40106: common questions
Where can I find a CD40106 reference design?
Each of the 9 boards on this page is a real design using the CD40106. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CD40106 pin 10 connected?
Pin 10 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the CD40106.
How is the CD40106 pin 11 connected?
Pin 11 is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the CD40106.
How is the CD40106 pin 2 connected?
Pin 2 is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the CD40106.
Which microcontrollers do boards using the CD40106 use?
Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the CD40106?
The median is 157.8 × 112.2 mm, and 63% are two-layer designs.
What is the most popular open source board using the CD40106?
By GitHub stars, 810 by minisystem, with 10 stars.
Can I simulate one of these boards using the CD40106 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.