2 open source boards using the Charger2A

Real designs built with the Charger2A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The Charger2A in open source designs

The gallery holds 2 open source boards using the Charger2A from 2 GitHub repositories; a typical one measures about 148.7 × 138.7 mm and carries around 175 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Sharpikeebo by ccadic.

Parts used alongside the Charger2A

Microcontrollers on boards using the Charger2A

What boards using the Charger2A are built for

Charger2A: common questions

Where can I find a Charger2A reference design?

Each of the 2 boards on this page is a real design using the Charger2A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the Charger2A use?

Most are built on AVR/Arduino (2).

How big is a typical board using the Charger2A?

The median is 148.7 × 138.7 mm, and 50% are two-layer designs.

What is the most popular open source board using the Charger2A?

By GitHub stars, Sharpikeebo by ccadic, with 142 stars.

Can I simulate one of these boards using the Charger2A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part