6 open source boards using the Clock
Real designs built with the Clock, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Cpu board
rjw57
99.1 × 99.1 mm68 parts2LMIT68Cpld cpu
jimmo
259.1 × 198.1 mm435 parts4LMIT16Pdf viewer
tyano463
42.2 × 20.9 mm17 parts2LNo license0Q2a
joewing
154 × 160 mm154 parts2LNo license41Lyrebird dac
tm-treehouse
250.8 × 59 mm42 parts2LNo license0Bp leanplate
ifilot
319.9 × 154.4 mm24 parts2LCERN-OHL-S-2.02
How designs wire the Clock
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the Clock connects to, and the resistors, capacitors and other passives placed on it.
- The I4 pin is tied to GND on 3 of 5 designs (a signal on 2).
- The I1/CLK pin has a crystal on 2 of 5 designs.
- The I7 pin is tied to GND on 2 of 3 designs.
- The IO8 pin is left unconnected on 2 of 3 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| I1/CLKpin 1 | Connected to: Not connected 40% · VCC 20% · a signal 40% |
|
| I4pin 4 | Connected to: GND 60% · a signal 40% | — |
| I7pin 7 | Connected to: GND 67% · a signal 33% | — |
| IO8pin 12 | Connected to: Not connected 67% · a signal 33% | — |
| IO7pin 13 | Connected to: Not connected 67% · a signal 33% | — |
| IO4pin 16 | Connected to: Not connected 100% | — |
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cpu board by rjw57, Q2a by joewing, Cpld cpu by jimmo and Bp leanplate by ifilot.
The Clock in open source designs
The gallery holds 6 open source boards using the Clock from 6 GitHub repositories; a typical one measures about 202.4 × 126.7 mm and carries around 55 components.
83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Cpu board by rjw57.
What boards using the Clock are built for
Clock: common questions
Where can I find a Clock reference design?
Each of the 6 boards on this page is a real design using the Clock. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Clock I4 pin connected?
The I4 pin is tied to GND on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the Clock.
How is the Clock I1/CLK pin connected?
The I1/CLK pin has a crystal on 2 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Clock.
How is the Clock I7 pin connected?
The I7 pin is tied to GND on 2 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the Clock.
How big is a typical board using the Clock?
The median is 202.4 × 126.7 mm, and 83% are two-layer designs.
What is the most popular open source board using the Clock?
By GitHub stars, Cpu board by rjw57, with 68 stars.
Can I simulate one of these boards using the Clock before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.