5 open source boards using the CP2104-F03-GM
Real designs built with the CP2104-F03-GM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ProtogenControllerV1
coelacant1
65 × 52 mm59 parts4LGPL-3.08ESP32
Kicad pulse supply rev-B
adilet2109
127 × 96.5 mm176 parts4LNo license1STM32
Usbsupply
brightcloudy
50 × 50 mm78 parts2LNo license0- schematic only · 102 parts
Isolated rs485-modbus transceiver
manhoosbilli1
102 partsNo license0 STM32
BMS-Master
UCDFS
135.1 × 159.4 mm218 parts2LNo license0
The CP2104-F03-GM in open source designs
The gallery holds 5 open source boards using the CP2104-F03-GM from 5 GitHub repositories; a typical one measures about 96 × 74.3 mm and carries around 102 components.
50% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is ProtogenControllerV1 by coelacant1.
Parts used alongside the CP2104-F03-GM
What boards using the CP2104-F03-GM are built for
CP2104-F03-GM: common questions
Where can I find a CP2104-F03-GM reference design?
Each of the 5 boards on this page is a real design using the CP2104-F03-GM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CP2104-F03-GM use?
Most are built on ESP32 (2) and STM32 (2).
How big is a typical board using the CP2104-F03-GM?
The median is 96 × 74.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the CP2104-F03-GM?
By GitHub stars, ProtogenControllerV1 by coelacant1, with 8 stars.
Can I simulate one of these boards using the CP2104-F03-GM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.