6 open source boards using the CYUSB3014-BZXC
Real designs built with the CYUSB3014-BZXC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
V4.0
tomojitakasu
70 × 92.8 mm238 parts4LBSD-3-Clause526V3.0
osqzss
72 × 26 mm158 parts4LBSD-3-Clause18FPGA
PCB For FPGA Path Tracer
Scrarf
50 × 50 mm199 parts8LNo license1FPGA
Scopefun hardware
snhobbs
100 × 160 mm589 parts6LCustom license0V4.1
tomojitakasu
70 × 92.8 mm221 parts4LBSD-3-Clause526V3.0
tomojitakasu
72 × 26 mm158 parts4LBSD-3-Clause526
The CYUSB3014-BZXC in open source designs
The gallery holds 6 open source boards using the CYUSB3014-BZXC from 4 GitHub repositories; a typical one measures about 71 × 71.4 mm and carries around 210 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is V4.0 by tomojitakasu.
Parts used alongside the CYUSB3014-BZXC
Microcontrollers on boards using the CYUSB3014-BZXC
What boards using the CYUSB3014-BZXC are built for
CYUSB3014-BZXC: common questions
Where can I find a CYUSB3014-BZXC reference design?
Each of the 6 boards on this page is a real design using the CYUSB3014-BZXC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the CYUSB3014-BZXC?
The 74AVC9112DCH, AT24CM01-XHM, MAX2771, PI3USB302-AZBEX and SPX3819M5-L-1-2/TR appear in the most repositories here.
Which microcontrollers do boards using the CYUSB3014-BZXC use?
Most are built on FPGA (2).
How big is a typical board using the CYUSB3014-BZXC?
The median is 71 × 71.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the CYUSB3014-BZXC?
By GitHub stars, V4.0 by tomojitakasu, with 526 stars.
Can I simulate one of these boards using the CYUSB3014-BZXC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.