4 open source boards using the SPX3819M5-L-1-2/TR

Real designs built with the SPX3819M5-L-1-2/TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The SPX3819M5-L-1-2/TR in open source designs

The gallery holds 4 open source boards using the SPX3819M5-L-1-2/TR from 2 GitHub repositories; a typical one measures about 71 × 59.4 mm and carries around 190 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is V4.0 by tomojitakasu.

Parts used alongside the SPX3819M5-L-1-2/TR

What boards using the SPX3819M5-L-1-2/TR are built for

RF & radio 4

SPX3819M5-L-1-2/TR: common questions

Where can I find a SPX3819M5-L-1-2/TR reference design?

Each of the 4 boards on this page is a real design using the SPX3819M5-L-1-2/TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the SPX3819M5-L-1-2/TR?

The 74AVC9112DCH, AT24CM01-XHM, CYUSB3014-BZXC, MAX2771 and PI3USB302-AZBEX appear in the most repositories here.

How big is a typical board using the SPX3819M5-L-1-2/TR?

The median is 71 × 59.4 mm, and 0% are two-layer designs.

What is the most popular open source board using the SPX3819M5-L-1-2/TR?

By GitHub stars, V4.0 by tomojitakasu, with 526 stars.

Can I simulate one of these boards using the SPX3819M5-L-1-2/TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.