6 open source boards using the 74AVC9112DCH

Real designs built with the 74AVC9112DCH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The 74AVC9112DCH in open source designs

The gallery holds 6 open source boards using the 74AVC9112DCH from 4 GitHub repositories; a typical one measures about 71 × 48.7 mm and carries around 175 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is V4.0 by tomojitakasu.

What boards using the 74AVC9112DCH are built for

74AVC9112DCH: common questions

Where can I find a 74AVC9112DCH reference design?

Each of the 6 boards on this page is a real design using the 74AVC9112DCH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74AVC9112DCH?

The AMBE-3000R, AT24CM01-XHM, CYUSB3014-BZXC, MAX2771 and PI3USB302-AZBEX appear in the most repositories here.

How big is a typical board using the 74AVC9112DCH?

The median is 71 × 48.7 mm, and 0% are two-layer designs.

What is the most popular open source board using the 74AVC9112DCH?

By GitHub stars, V4.0 by tomojitakasu, with 526 stars.

Can I simulate one of these boards using the 74AVC9112DCH before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part