7 open source boards using the dc-dc
Real designs built with the dc-dc, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Geki pico
whowechina
268 × 88.6 mm89 parts2LNo license39Din power atm90e26
whatnick
86.9 × 32.8 mm59 parts2LNo license6HappyDayNeighbors
BitKnitting
107.2 × 91.1 mm76 parts2LNo license1Ha
eljotx
137 × 63 mm135 parts2LNo license2AVR/Arduino
IncuTester SMD
alazifi
122.4 × 73.4 mm31 parts2LNo license0AVR/Arduino
IncuTester
alazifi
128.7 × 74.6 mm27 parts2LNo license0Hc
eljotx
137 × 63 mm82 parts2LNo license2
How designs wire the dc-dc
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the dc-dc connects to, and the resistors, capacitors and other passives placed on it.
- The PIN_1 pin is tied to GND on 3 of 5 designs.
- The PIN_2 pin is tied to 5V on 3 of 5 designs (GND on 2).
- The PIN_3 pin is tied to GND on 3 of 5 designs (3.3V on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PIN_1pin 1 | Connected to: GND 60% · 12V 20% · a signal 20% | — |
| PIN_2pin 2 | Connected to: 5V 60% · GND 40% | — |
| PIN_3pin 3 | Connected to: GND 60% · 3.3V 40% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Geki pico by whowechina, Din power atm90e26 by whatnick, Ha by eljotx and HappyDayNeighbors by BitKnitting.
The dc-dc in open source designs
The gallery holds 7 open source boards using the dc-dc from 5 GitHub repositories; a typical one measures about 128.7 × 73.4 mm and carries around 76 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Geki pico by whowechina.
Microcontrollers on boards using the dc-dc
What boards using the dc-dc are built for
dc-dc: common questions
Where can I find a dc-dc reference design?
Each of the 7 boards on this page is a real design using the dc-dc. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the dc-dc PIN_1 pin connected?
The PIN_1 pin is tied to GND on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the dc-dc.
How is the dc-dc PIN_2 pin connected?
The PIN_2 pin is tied to 5V on 3 of 5 designs (GND on 2). Counted from the KiCad layouts of 5 open source designs using the dc-dc.
How is the dc-dc PIN_3 pin connected?
The PIN_3 pin is tied to GND on 3 of 5 designs (3.3V on 2). Counted from the KiCad layouts of 5 open source designs using the dc-dc.
Which microcontrollers do boards using the dc-dc use?
Most are built on AVR/Arduino (2).
How big is a typical board using the dc-dc?
The median is 128.7 × 73.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the dc-dc?
By GitHub stars, Geki pico by whowechina, with 39 stars.
Can I simulate one of these boards using the dc-dc before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.