2 open source boards using the DG418LDY
Real designs built with the DG418LDY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Mgc xmega64
0x007E
33 × 48.9 mm40 parts2LCC-BY-NC-4.00AVR/Arduino
Mgc m4809
0x007E
33 × 48.9 mm39 parts2LCC-BY-NC-4.00
The DG418LDY in open source designs
The gallery holds 2 open source boards using the DG418LDY from 2 GitHub repositories; a typical one measures about 33 × 48.9 mm and carries around 40 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Mgc xmega64 by 0x007E.
Microcontrollers on boards using the DG418LDY
What boards using the DG418LDY are built for
DG418LDY: common questions
Where can I find a DG418LDY reference design?
Each of the 2 boards on this page is a real design using the DG418LDY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DG418LDY use?
Most are built on AVR/Arduino (2).
How big is a typical board using the DG418LDY?
The median is 33 × 48.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the DG418LDY?
By GitHub stars, Mgc xmega64 by 0x007E, with 0 stars.
Can I simulate one of these boards using the DG418LDY before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.