2 open source boards using the DRV8353RS

Real designs built with the DRV8353RS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The DRV8353RS in open source designs

The gallery holds 2 open source boards using the DRV8353RS from 2 GitHub repositories; a typical one measures about 77.8 × 63.2 mm and carries around 115 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Flatmcu by GyrocopterLLC.

Parts used alongside the DRV8353RS

Microcontrollers on boards using the DRV8353RS

What boards using the DRV8353RS are built for

DRV8353RS: common questions

Where can I find a DRV8353RS reference design?

Each of the 2 boards on this page is a real design using the DRV8353RS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the DRV8353RS?

The AP1117-33, STM32G431CBTx and TPS563240 appear in the most repositories here.

Which microcontrollers do boards using the DRV8353RS use?

Most are built on STM32 (2).

How big is a typical board using the DRV8353RS?

The median is 77.8 × 63.2 mm, and 0% are two-layer designs.

What is the most popular open source board using the DRV8353RS?

By GitHub stars, Flatmcu by GyrocopterLLC, with 40 stars.

Can I simulate one of these boards using the DRV8353RS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part