6 open source boards using the DRV8353SRTAR
Real designs built with the DRV8353SRTAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Esc rev b
iamdarshg
173.8 × 282.9 mm687 parts4LNo license2ESP32
CAN-HBC-S3
ViktorNfa
70 × 50 mm160 parts4LNo license1STM32
Dash48V
ShangqunYu
72 × 69.7 mm90 parts6LNo license0STM32
Foc control
sujaygouda123
80 × 80 mm87 parts8LNo license0STM32
Esc rev b.before hand power replicate
iamdarshg
170 × 172.2 mm681 parts6LNo license2STM32
Esc
iamdarshg
246 × 296 mm599 parts4LNo license2
The DRV8353SRTAR in open source designs
The gallery holds 6 open source boards using the DRV8353SRTAR from 4 GitHub repositories; a typical one measures about 125 × 126.1 mm and carries around 380 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Esc rev b by iamdarshg.
Parts used alongside the DRV8353SRTAR
What boards using the DRV8353SRTAR are built for
DRV8353SRTAR: common questions
Where can I find a DRV8353SRTAR reference design?
Each of the 6 boards on this page is a real design using the DRV8353SRTAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DRV8353SRTAR use?
Most are built on STM32 (5) and ESP32 (1).
How big is a typical board using the DRV8353SRTAR?
The median is 125 × 126.1 mm, and 0% are two-layer designs.
What is the most popular open source board using the DRV8353SRTAR?
By GitHub stars, Esc rev b by iamdarshg, with 2 stars.
Can I simulate one of these boards using the DRV8353SRTAR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.