13 open source boards using the DSC60XX
Real designs built with the DSC60XX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
2019-07-06 11:52:16 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031Microchip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511FPGA
2019-07-06 12:26:53 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-06 12:29:23 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:06:08 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:06:09 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:15:58 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:33:00 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:33:20 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 18:07:42 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 18:08:38 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 18:25:46 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
Fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031
The DSC60XX in open source designs
The gallery holds 13 open source boards using the DSC60XX from 2 GitHub repositories; a typical one measures about 65 × 56.5 mm and carries around 87 components.
100% use four copper layers or more, and 92% carry an open source license.
The most starred is Fpgaboy by Wren6991.
Parts used alongside the DSC60XX
Microcontrollers on boards using the DSC60XX
What boards using the DSC60XX are built for
DSC60XX: common questions
Where can I find a DSC60XX reference design?
Each of the 13 boards on this page is a real design using the DSC60XX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DSC60XX use?
Most are built on FPGA (12) and Microchip SAM (1).
How big is a typical board using the DSC60XX?
The median is 65 × 56.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the DSC60XX?
By GitHub stars, Fpgaboy by Wren6991, with 511 stars.
Can I simulate one of these boards using the DSC60XX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.