6 open source boards using the ESD
Real designs built with the ESD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Vaio re
CRImier
75 × 65 mm274 parts4LGPL-3.0254NXP
Ultimate Hacking Keyboard - Right Main Board
UltimateHackingKeyboard
150.1 × 123.4 mm131 parts2LGPL-3.0177NXP
UHK 60 v2 - Right Half
UltimateHackingKeyboard
150.1 × 123.4 mm162 parts2LCC-BY-NC-4.011RP2040/RP2350
KBoard
YakshithK
306 × 125 mm199 parts2LNo license0NXP
Ultimate Hacking Keyboard - Left Main Board
UltimateHackingKeyboard
135.9 × 123.4 mm107 parts2LGPL-3.0177NXP
UHK 60 v2 - Left Half
UltimateHackingKeyboard
136.4 × 123.4 mm139 parts2LCC-BY-NC-4.011
The ESD in open source designs
The gallery holds 6 open source boards using the ESD from 4 GitHub repositories; a typical one measures about 143.3 × 123.4 mm and carries around 151 components.
83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Vaio re by CRImier.
Parts used alongside the ESD
Microcontrollers on boards using the ESD
What boards using the ESD are built for
ESD: common questions
Where can I find a ESD reference design?
Each of the 6 boards on this page is a real design using the ESD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESD?
The CAT24C256WI-GT3, MK22FN512VLH12, MKL03Z32VFK4 and RP2040 appear in the most repositories here.
Which microcontrollers do boards using the ESD use?
Most are built on NXP (4) and RP2040/RP2350 (2).
How big is a typical board using the ESD?
The median is 143.3 × 123.4 mm, and 83% are two-layer designs.
What is the most popular open source board using the ESD?
By GitHub stars, Vaio re by CRImier, with 254 stars.
Can I simulate one of these boards using the ESD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.