2 open source boards using the ESD2CAN24DBZRQ1

Real designs built with the ESD2CAN24DBZRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ESD2CAN24DBZRQ1 in open source designs

The gallery holds 2 open source boards using the ESD2CAN24DBZRQ1 from 2 GitHub repositories; a typical one measures about 60 × 60 mm and carries around 313 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is OpenXTCM5-Head-Unit by mibs510.

Microcontrollers on boards using the ESD2CAN24DBZRQ1

What boards using the ESD2CAN24DBZRQ1 are built for

ESD2CAN24DBZRQ1: common questions

Where can I find a ESD2CAN24DBZRQ1 reference design?

Each of the 2 boards on this page is a real design using the ESD2CAN24DBZRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ESD2CAN24DBZRQ1 use?

Most are built on Raspberry Pi (1).

How big is a typical board using the ESD2CAN24DBZRQ1?

The median is 60 × 60 mm, and 50% are two-layer designs.

What is the most popular open source board using the ESD2CAN24DBZRQ1?

By GitHub stars, OpenXTCM5-Head-Unit by mibs510, with 0 stars.

Can I simulate one of these boards using the ESD2CAN24DBZRQ1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part