11 open source boards using the ESP32-S3-WROOM-1U-N16

Real designs built with the ESP32-S3-WROOM-1U-N16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the ESP32-S3-WROOM-1U-N16

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-S3-WROOM-1U-N16 connects to, and the resistors, capacitors and other passives placed on it.

  • The IO46 pin is left unconnected on 4 of 5 designs.
  • The IO45 pin is left unconnected on 4 of 5 designs.
  • The IO2 pin is left unconnected on 4 of 5 designs.
  • The 3V3 pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
GNDpin 1, 40, 41Connected to: GND 64% · a signal 29%
3V3pin 2Connected to: 3.3V 60% · a signal 40%
IO4pin 4Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 0 Ω (1), 4.7 kΩ (1)
IO7pin 7Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 0 Ω (1), 1 MΩ (1), 100 kΩ (1)
IO3pin 15Connected to: Not connected 60% · a signal 40%
IO46pin 16Connected to: Not connected 80% · a signal 20%
IO9pin 17Connected to: A connector 40% · not connected 40%
  • Pull-up to 3.3V on 40% · 5.1 kΩ (1), 10 kΩ (1)
IO10pin 18Connected to: Not connected 40% · GND 20% · a signal 40%
  • Pull-up to 3.3V on 40% · 5.1 kΩ (1), 100 kΩ (1)
IO11pin 19Connected to: Not connected 60% · a signal 40%
IO45pin 26Connected to: Not connected 80% · a signal 20%
IO35pin 28Connected to: Not connected 60% · GND 20% · a signal 20%
IO36pin 29Connected to: Not connected 60% · a signal 40%
IO37pin 30Connected to: Not connected 60% · a signal 40%
IO42pin 35Connected to: Not connected 60% · a signal 40%
IO2pin 38Connected to: Not connected 80% · GND 20%
IO1pin 39Connected to: Not connected 60% · VSYS 20% · a signal 20%

23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AstraControl by LiveLeds, Panel by YDrip, IoT-NG by William2R and Actuator Board V1 by colin-skinner.

The ESP32-S3-WROOM-1U-N16 in open source designs

The gallery holds 11 open source boards using the ESP32-S3-WROOM-1U-N16 from 5 GitHub repositories; a typical one measures about 102 × 68.3 mm and carries around 92 components.

64% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.

The most starred is Panel by YDrip.

Microcontrollers on boards using the ESP32-S3-WROOM-1U-N16

What boards using the ESP32-S3-WROOM-1U-N16 are built for

ESP32-S3-WROOM-1U-N16: common questions

Where can I find a ESP32-S3-WROOM-1U-N16 reference design?

Each of the 11 boards on this page is a real design using the ESP32-S3-WROOM-1U-N16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-S3-WROOM-1U-N16 IO46 pin connected?

The IO46 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-S3-WROOM-1U-N16.

How is the ESP32-S3-WROOM-1U-N16 IO45 pin connected?

The IO45 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-S3-WROOM-1U-N16.

How is the ESP32-S3-WROOM-1U-N16 IO2 pin connected?

The IO2 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-S3-WROOM-1U-N16.

Which microcontrollers do boards using the ESP32-S3-WROOM-1U-N16 use?

Most are built on ESP32 (10) and RP2040/RP2350 (1).

How big is a typical board using the ESP32-S3-WROOM-1U-N16?

The median is 102 × 68.3 mm, and 64% are two-layer designs.

What is the most popular open source board using the ESP32-S3-WROOM-1U-N16?

By GitHub stars, Panel by YDrip, with 2 stars.

Can I simulate one of these boards using the ESP32-S3-WROOM-1U-N16 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part