5 open source boards using the ESP32-WROOM-32E (8MB)

Real designs built with the ESP32-WROOM-32E (8MB), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the ESP32-WROOM-32E (8MB)

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-WROOM-32E (8MB) connects to, and the resistors, capacitors and other passives placed on it.

  • The SHD/SD2 pin is left unconnected on 5 of 5 designs.
  • The SWP/SD3 pin is left unconnected on 5 of 5 designs.
  • The SCS/CMD pin is left unconnected on 5 of 5 designs.
  • The SCK/CLK pin is left unconnected on 5 of 5 designs.
GNDpin 1, 15, 38, 39Connected to: GND 100%
VDDpin 2Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (3), 22 µF (2), 10 µF (1)
ENpin 3Connected to: A connector 40%
  • Capacitor to GND on 80% · 100 nF (3), 1 µF (1)
  • Pull-up to 3.3V on 80% · 10 kΩ (4)
SENSOR_VPpin 4Connected to: Signal 60% · not connected 40%
  • Pull-up to 3.3V on 40% · 3.3 kΩ (1), 4.7 kΩ (1)
SENSOR_VNpin 5Connected to: Not connected 60% · a signal 40%
  • Pull-up to 3.3V on 40% · 3.3 kΩ (1), 4.7 kΩ (1)
IO32pin 8Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 40% · 3.3 kΩ (1), 4.7 kΩ (1)
IO33pin 9Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 4.7 kΩ (2), 3.3 kΩ (1)
IO14pin 13Connected to: Not connected 60% · a signal 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (1), 3.3 kΩ (1)
IO13pin 16Connected to: A connector 40% · not connected 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (1), 3.3 kΩ (1)
SHD/SD2pin 17Connected to: Not connected 100%
SWP/SD3pin 18Connected to: Not connected 100%
SCS/CMDpin 19Connected to: Not connected 100%
SCK/CLKpin 20Connected to: Not connected 100%
SDO/SD0pin 21Connected to: Not connected 100%
SDI/SD1pin 22Connected to: Not connected 100%
IO2pin 24Connected to: Not connected 80% · a signal 20%
IO0pin 25Connected to: Signal 100%
  • Pull-up to 3.3V on 80% · 10 kΩ (4)
IO5pin 29Connected to: Signal 60% · not connected 40%
  • Pull-up to 3.3V on 40% · 3.3 kΩ (1), 47 kΩ (1)
NCpin 32Connected to: Not connected 100%

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Clockcore by ansemjo, ESP 8 Relay Module by thermseekr, DoorbellCamPhy by mc-cat-tty and Industrial IoT Controller by Hossam-Mamdouh.

The ESP32-WROOM-32E (8MB) in open source designs

The gallery holds 5 open source boards using the ESP32-WROOM-32E (8MB) from 5 GitHub repositories; a typical one measures about 89.8 × 92.5 mm and carries around 54 components.

80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Clockcore by ansemjo.

Microcontrollers on boards using the ESP32-WROOM-32E (8MB)

What boards using the ESP32-WROOM-32E (8MB) are built for

ESP32-WROOM-32E (8MB): common questions

Where can I find a ESP32-WROOM-32E (8MB) reference design?

Each of the 5 boards on this page is a real design using the ESP32-WROOM-32E (8MB). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-WROOM-32E (8MB) SHD/SD2 pin connected?

The SHD/SD2 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-WROOM-32E (8MB).

How is the ESP32-WROOM-32E (8MB) SWP/SD3 pin connected?

The SWP/SD3 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-WROOM-32E (8MB).

How is the ESP32-WROOM-32E (8MB) SCS/CMD pin connected?

The SCS/CMD pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-WROOM-32E (8MB).

Which microcontrollers do boards using the ESP32-WROOM-32E (8MB) use?

Most are built on ESP32 (5).

How big is a typical board using the ESP32-WROOM-32E (8MB)?

The median is 89.8 × 92.5 mm, and 80% are two-layer designs.

What is the most popular open source board using the ESP32-WROOM-32E (8MB)?

By GitHub stars, Clockcore by ansemjo, with 12 stars.

Can I simulate one of these boards using the ESP32-WROOM-32E (8MB) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part