5 open source boards using the f042_wideband_module
Real designs built with the f042_wideband_module, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
OpenEFI rev4 bkp
Churrosoft
164 × 118 mm317 parts4LCERN-OHL-S-2.08Polygonus-Universal-112
FOME-Tech
160 × 121 mm120 parts4LNo license5Board carrier
mck1117
40 × 36.5 mm18 parts2LMIT76Board carrier
FDSoftware
40 × 36.5 mm18 parts2LMIT0Board carrier
JRDMcLAREN
40 × 36.5 mm18 parts2LMIT0
How designs wire the f042_wideband_module
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the f042_wideband_module connects to, and the resistors, capacitors and other passives placed on it.
- The 5V pin is tied to 5V on 5 of 5 designs.
- The VBATT_SENSE pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF).
- The SEL_2 pin is left unconnected on 4 of 5 designs.
- The BOOT0 pin is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 5Vpin 1 | Connected to: 5V 100% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| SEL_1pin 3 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| SEL_2pin 4 | Connected to: Not connected 80% · a signal 20% | — |
| VBATT_SENSEpin 7 | Connected to: LM78M05_TO252 60%, a connector 60% · 12V 20% |
|
| BOOT0pin 8 | Connected to: Not connected 80% · a signal 20% | — |
| HEAT_GNDpin 9 | Connected to: GND 100% | — |
| HEAT_GND2pin 10 | Connected to: GND 100% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Board carrier by mck1117, OpenEFI rev4 bkp by Churrosoft, Polygonus-Universal-112 by FOME-Tech and Board carrier by FDSoftware.
The f042_wideband_module in open source designs
The gallery holds 5 open source boards using the f042_wideband_module from 5 GitHub repositories; a typical one measures about 40 × 36.5 mm and carries around 18 components.
60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Board carrier by mck1117.
Parts used alongside the f042_wideband_module
Microcontrollers on boards using the f042_wideband_module
What boards using the f042_wideband_module are built for
f042_wideband_module: common questions
Where can I find a f042_wideband_module reference design?
Each of the 5 boards on this page is a real design using the f042_wideband_module. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the f042_wideband_module 5V pin connected?
The 5V pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the f042_wideband_module.
How is the f042_wideband_module VBATT_SENSE pin connected?
The VBATT_SENSE pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the f042_wideband_module.
How is the f042_wideband_module SEL_2 pin connected?
The SEL_2 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the f042_wideband_module.
What parts are used alongside the f042_wideband_module?
The TJA1051T-3, LM78M05_TO252 and SRV05-4 appear in the most repositories here.
Which microcontrollers do boards using the f042_wideband_module use?
Most are built on STM32 (1).
How big is a typical board using the f042_wideband_module?
The median is 40 × 36.5 mm, and 60% are two-layer designs.
What is the most popular open source board using the f042_wideband_module?
By GitHub stars, Board carrier by mck1117, with 76 stars.
Can I simulate one of these boards using the f042_wideband_module before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.